CM602规格说明书（英文） - 第8页

CM602-L 2006.0515 - 3 - Support f or m achine coup ling (m odular izing) CM602-L s upports f or coup ling (m odular izing); multiple machines (up to eight stages) can be coupled . ∗∗ Remarks ∗∗ • Exam ple of couplin g: W…

CM602-L 2006.0515

- 2 -

PCB exchange time

For CM602-L, two PCBs can be clamped on one stage. (PCB length: 240 mm or less)

When two PCBs are clamped, after the placement of the PCB on the downstream side is complete, that on the

upstream side is carried out continuously.

For small sized PCBs (L 240 mm × W 240 mm or less), one PCB is replaced by another within

at least 0.9

seconds

(*).

(That is attainable if no components are placed on the back side, and the side clamp and support pins are not

used. The others are based on our measurement conditions.)

* The transfer time varies depending on such conditions as a PCB size and whether the support pins are used or not.

For further information, please contact us.

Feature of chip supply during operation

CM602-L has adopted the tape splicing feature, which

allows supplying components while the placement

machine is operating without stopping the placement

operations.

If you register the number of components into the

placement machine data beforehand, you will have the

notice of component empty.

Tape feeder

Splicing

Trailing edge of tape

During operation

Tip of tape

reel

For the large PCB as that for

personal computer

For small and middle sized PCBs as those for mobile telephone,

personal handyphone system, and digital camera

240 mm or less

First placement position

Second placement position

Placement stage A

Placement stage B

Transport direction

240 mm

to 510 mm

CM602-L 2006.0515

- 3 -

Support for machine coupling (modularizing)

CM602-L supports for coupling (modularizing);

multiple machines (up to eight stages) can be coupled

∗∗

Remarks

∗∗

•

Example of coupling: When all the machines are CM602-L, up to four of them can be coupled.

•

If the number of the machines to be coupled exceeds four as a result of the combination of CM602-L, the

switching hub needs to be installed on the fifth machine or later.

< Conceptual illustration of the data distribution in the case of two

machines (four stages), CM602-L + CM602-L >

Stage

Placement data

uto distribution

Placement

data

CM602-L CM602-L

Placement

data

Placement

data

Placement

data

uto distribution

Stage

StageStage

CM602-L 2006.0515

- 4 -

Versatility

Compatibility with the CM400 series

CM602-L not only provides high productivity but also maintains compatibility with the CM400 series by using the

CM400-series-proven feeders, nozzles, data, feeder cart, operation screens, and other features.

* Except for the nozzles for High Speed head (12 nozzles) type.

Exchangeable between High Speed head and Multi-functional head

For CM602-L, three types of placement heads can be selected for each placement stage.

・

There are two types of High Speed heads (12 nozzles type / 8 nozzles type) with matrix-like arranged nozzles

(2 × 6 / 2 × 4). The servomotor is used for the independent vertical driving of each nozzle, providing a high

reliability and high speed operation.

・

The Multi-functional head has three nozzles. Each nozzle is equipped with an independent vertical drive

system and θ-drive system. The placement load generated at the nozzle tip can be controlled in real time from

0.5 N up to 50 N, based on the settings of data.

・

For the delivered machine, our engineer supports exchanging heads on the spot.

* Please select the head for each stage. It is not possible to set different types of heads to the front and the rear table on the same stage.

Versatility of feeders

Conventional several tens of tape feeders are integrated into eight types of feeders. These eight types of feeders

support 8 mm up to 104 mm paper/embossed tape. Tape feeding is driven by the servomotor; feed pitch and

feed speed are set according to the components. These parameters are set by the data sent from the CM602-L

main body.

* These tape feeders (servomotor-driven type) are shared with the CM400 series.

* For High Speed head (12 nozzles) type, the version of the software incorporated in the double tape feeder needs to be updated to Ver. 5.00

or later. (Because of the gang feed support in right and left lanes of double tape feeder.)

Valid number of feeders

Up to 108 double tape feeders can be set on

CM602-L. (When the tape width is 8 mm)

At this time, 216 reels can be set.

27 feeders × 2 reels × 4 tables

= 216 of 8 mm tape reels can be set.

Feeder table

(Four locations)

8 mm double tape feeder

Tape feeder for both

12 mm and 16 mm

Tape feeder for both

24 mm and 32 mm

Tape feeder for both

44 mm and 56 mm

72 mm tape feeder 88 mm tape feeder 104 mm tape feeder

8 mm single tape feeder