00196430-0102-AI_Head_Reconfiguration_Kit_SX_CPP_en_de - 第3页

Inhaltsverzeichnis 3 Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP Inhaltsverzeichnis 1 Einleitung 5 1.1 Sicherheitshinweise 5 1.1.1 Konventionen zur Verwendun g von Sicherheitshinweisen 5 1.1.2 S…

100%1 / 78
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks
whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we
cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary connections are included in subsequent edi
-
tions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Deutschland
Item no.: 00196430-0102
www.siplace.com Printed by ASM Assembly Systems
Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM Assembly Systems GmbH & Co. KG. Die übrigen Be
-
zeichnungen in dieser Schrift können Marken sein, deren Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.
Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft. Dennoch können Abweichungen nicht ausgeschlos
-
sen werden, sodass wir für die vollständige Übereinstimmung keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und not
-
wendige Korrekturen sind in den nachfolgenden Auflagen enthalten.
Copyright © ASM Assembly Systems Änderungen vorbehalten
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Deutschland
Artikel-Nr.: 00196430-0102
www.siplace.com Printed by ASM Assembly Systems
Inhaltsverzeichnis
3 Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP
Inhaltsverzeichnis
1 Einleitung 5
1.1 Sicherheitshinweise 5
1.1.1 Konventionen zur Verwendung von Sicherheitshinweisen 5
1.1.2 Sicherheitshinweise zu Arbeiten an starken Magnetfeldern 6
1.1.3 Sicherheitshinweise zur Stromversorgung 6
1.1.4 Sicherheitshinweise zur Druckluftversorgung 7
1.1.5 Sicherheitshinweise zu Arbeiten am Schneidgerät 7
1.1.6 Sicherheitshinweise zum Portal 7
1.2 Was vor Beginn der Arbeiten zu tun ist... 8
1.3 Abkürzungen 10
2 Kurzbeschreibung 11
2.1 Lieferumfang 11
2.1.1 Reconfiguration Kit CPP SX1/2 [00519983-xx] 11
2.1.2 Zusätzlicher Teilesatz für TwinHead auf CPx 12
2.1.3 Optionen für CPP 12
2.2 Benötigte Werkzeuge und Hilfsmittel 13
2.3 Voraussetzungen und Restriktionen für den CPP-Bestückkopf 14
2.3.1 Umbauzeiten 14
2.4 Kopfmodularität SX 70x 15
2.4.1 Kopfkonfigurationen an der SIPLACE SX1 15
2.4.2 Kopfkonfigurationen an der SIPLACE SX2 15
2.5 Ablauf des Bestückkopf-Tausches 16
2.5.1 Ablauf der Demontage 16
2.5.2 Ablauf der Montage 17
3 Einbau des CPP-Bestückkopfes 19
3.1 Vor der Demontage des Bestückkopfes 19
3.1.1 Konfiguration der Bestückköpfe in SIPLACE Pro 19
3.1.2 Sichern der bestehenden Maschinendaten 19
3.1.3 BE-Wagen abdocken und Maschine ausschalten 20
3.2 Demontage des C&P20A-Bestückkopfes 20
3.2.1 Weitere Aspekte für die Konfiguration 21
3.3 Demontage des TwinHead 22
3.3.1 Weitere Aspekte für die Konfiguration 23
3.3.2 Umbau des Kopfadapters 23
3.4 Montage des CPP-Bestückkopfes 25
3.4.1 Kopf für die Einbauhöhe vorbereiten 25
3.4.2 BE-Kamera montieren 26
3.4.3 Daten- und Pneumatikleitungen anstecken 29
3.4.4 CPP-Kopf in die Maschine einsetzen 29
3.4.5 CPP-Kopf anschließen 30
3.4.6 Einstellungen am Basisadapter 31
3.4.7 Höheneinstellung und Einbau der Pipettenstation 32
3.4.7.1 Höheneinstellung der Pipettenstation 32
3.4.7.2 Einbau der Pipettenstation 33
3.4.7.3 Einbau des Niederhalters und des Kodierungsblechs 34
3.4.8 Anschlüsse auf der Hotlink-Karte (Box-PC) 39
3.5 Ein- und Ausbau von Optionen 39
3.5.1 Option Pipettenwechsler 39
3.5.2 Option Abfrage Abwurfbehälter 40
3.5.3 Option Stationäre Kamera 40
3.6 Abschließende Arbeiten 40
Contents
4 Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP
Table of Contents
1 Introduction 41
1.1 Safety Instructions 41
1.1.1 Conventions for the Use of Safety Instructions 41
1.1.2 Safety Instructions for Working with Strong Magnetic Fields 42
1.1.3 Safety Instructions for the Power Supply 42
1.1.4 Safety Instructions for the Compressed Air Supply 43
1.1.5 Safety Instructions for Work on the Cutting Device 43
1.1.6 Safety Instructions for the Gantry 43
1.2 Preparatory Work... 44
1.3 Abbreviations 46
2 Brief Description 47
2.1 Scope of Delivery 47
2.1.1 Reconfiguration Kit CPP SX1/2 [00519983-xx] 47
2.1.2 Additional Parts Set TwinHead to CPx 48
2.1.3 Options for CPP 48
2.2 Tools and Equipment Required 49
2.3 Requirements and Restrictions for the CPP Placement Head 50
2.3.1 Reconfiguration Duration 50
2.4 Head Modularity SX 70x 51
2.4.1 SIPLACE SX 1 51
2.4.2 SIPLACE SX 2 51
2.5 Sequence of the Placement Head Exchange 52
2.5.1 Disassembly Sequence 52
2.5.2 Assembly Sequence 53
3 Installing the CPP Placement Head 55
3.1 Before Disassembling the Placement Head 55
3.1.1 Configuration of the Placement Heads in SIPLACE Pro 55
3.1.2 Saving the Existing Machine Data 55
3.1.3 Docking Out the Component Trolley and Switching Off the Machine 55
3.2 Disassembling the C&P20A Placement Head 56
3.2.1 Further Aspects for the Configuration 57
3.3 Disassembling the TwinHead 58
3.3.1 Further Aspects for the Configuration 59
3.3.2 Conversion of the Head Adapter 59
3.4 Assembly of the CPP Placement Head 61
3.4.1 Preparing the Head for the Installation Height 61
3.4.2 Fitting the Component Camera 63
3.4.3 Connecting Data and Pneumatic Lines 65
3.4.4 Inserting the CPP Head Into the Machine 65
3.4.5 Connecting the CPP Head 66
3.4.6 Settings On the Base Adapter 67
3.4.7 Height Adjustment and Installation of the Nozzle Station 67
3.4.7.1 Height Adjustment of the Nozzle Station 68
3.4.7.2 Installing the Nozzle Station 69
3.4.7.3 Installing the Downholder and the Coding Sheet 70
3.4.8 Connections on the Hotlink Card (Box PC) 75
3.5 Installation and Removal of Options 75
3.5.1 Option Nozzle Changer 75
3.5.2 Option Verify Reject Bin 76
3.5.3 Option Stationary Camera 76
3.6 Final Work 76