00196430-0102-AI_Head_Reconfiguration_Kit_SX_CPP_en_de - 第50页

Brief Description Requirements and Restrictions for the CPP Place ment Head Reconfi guration Duration 50 Assembly Instructions / Montageanleitung Head Reconfiguratio n Kit CPP Requirements and Restrict ions for the CPP P…

Brief Description

Options for CPP Tools and Equipment Required

Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP 49

Tools and Equipment Required

2.2 Tools and Equipment Required

Designation Item No.

Torque wrench 03078400-xx (old version: 00376504-xx)

Extension with joint (170 x SK3) 03042635-xx

Extension straight (170 x SK3) 03043440-xx

Tool extension straight TX20 03073256-xx

Bit holder for TorqueVario screwdriver 03078706-xx

Depth measuring gauge 200 mm 03079617-xx

Pressure test device with measurement cable 00313523-xx

Conversion kit COT insert X 00378465-xx

Mapping Plate SX 560x460 Set

Alu Mapping Plate 560 x 460 D, SX1/2

03076118-xx

03076765-xx

Calibration tool version 3 CPP 03010565-xx

Calibration tool version SST23 C&P20 03034148-xx

Assembly Instructions Stationary Camera SX Series 00196608-xx

Assem Assembly Intructions SIPLACE SX 1/2 Noz

zle Changer

00196578-xx

Assembly Instructions Reject Bin SIPLACE SX Se

ries

00196615-xx

Assembly Instructions Stationary Camera Type 25

SIPLACE X Series, SX1/2, D3 and D1

00194554-xx

Service Manual SX1/2 00196496-xx

Brief Description

Requirements and Restrictions for the CPP Placement Head Reconfiguration Duration

50 Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP

Requirements and Restrictions for the CPP Placement Head

2.3 Requirements and Restrictions for the CPP Placement Head

▪ The camera type is added during the configuration query of the head reconfiguration kit. The C&P

component camera (type 29) 27x27 digital RK [03018637-xx] is the default.

– [03018637-xx] C&P component camera (type 29) 27x27 digital RK (default)

– [00119783-xx] CPP head camera (01005) (type 38)

▪ In a placement area with 2 gantries the CPP heads may only be installed on the same height. Thus,

both CPP heads have to be installed in either the high or the low position.

▪ If the CPP head is used together with a TwinHead in a placement area with 2 gantries, the CPP head

may only be installed in the high position.

▪ When using third party feeder modules pay particular attention on the crash danger.

▪ It is not possible to use a vacuum pump together with a CPP head. The head principle requires a

compressed air supply for the time being.

▪ During the placement of a PCB no nozzle change is executed with CPP heads (applies to old modes:

C&P, P&P and Mixed).

▪ In conjunction with a stationary camera the CPP head must always be installed in the high position

and the stationary camera in the low position.

▪ The CPP head can only be used with stationary cameras of function status -04 or higher.

▪ When using a CPP head no magazines of the C&P20A head are allowed on the nozzle changer.

This is monitored by the software.

Reconfiguration Duration

2.3.1 Reconfiguration Duration

The following reconfiguration durations per head can be expected:

Placement head Single-/Double conveyor Task

Disassembling CPP 20 min Without options such as nozzle changers, verify

component reject bin and stationary camera

Disassembling

C&P20A

20 min Without options such as nozzle changer, verify

component reject bin

Disassembling Twin

Head

30 min Verify Component reject bin

Assembling CPP 90 / 120 min With mapping and without options such as nozzle

changer, verify component reject bin and stationary

camera

Assembling C&P20A 90 / 120 min With mapping and without options such as nozzle

changer, query component reject bin

Assembling Twin

Head

90 / 120 min With mapping and without options such as nozzle

changer, verify component reject bin and stationary

camera

Brief Description

SIPLACE SX 1 Head Modularity SX 70x

Assembly Instructions / Montageanleitung Head Reconfiguration Kit CPP 51

Head Modularity SX 70x

2.4 Head Modularity SX 70x

The CPP head can either be installed in a high or a low position.

The following terms mean:

▪ Installation position low: CPP_L corresponds to a component height of 6 mm maximum.

▪ Installation position high: CPP_H corresponds to a component height of 11.5 mm maximum.

The following head configuration options are available:

SIPLACE SX 1

2.4.1 SIPLACE SX 1

Head configurations on the SIPLACE SX 1

SIPLACE SX 2

2.4.2 SIPLACE SX 2

Head configurations on the SIPLACE SX 2

Gantry 1 Default cameras Options

C&P20A STT 23 ----

CPP_H SST 29 Component camera SST 38

Stat. camera SST 33 (from FS 04 and in low installation posi

tion only)

CPP_L SST 29 Component camera SST38

TwinHead SST 33 Stat. camera SST 25 (location 1 only)

3D coplanarity module ST 37 (location 1 only)

Gantry 1 / Gantry 2 Default cameras Options

C&P20A / C&P20A STT 23 ----

CPP_H / CPP_H SST 29 Component camera SST 38

Stat. camera SST 33 possible on location 1 and

2 (from FS 04 and in low installation position on

ly)

CPP_L / CPP_L SST 29 Component camera SST38

CPP_H / TwinHead STT 29 (on gan

try 1)

Twin SST33 (on

gantry 2)

CPP:

Component camera SST 38

Stat. camera SST 33 (from FS 04 and in low in

stallation position only)

TwinHead:

Stat. camera SST 25 (location 1 only)

3D coplanarity module SST 37 (location 1 only)

TwinHead / TwinHead SST 33 Stat. camera SST 25 (location 1 only)

3D coplanarity module ST 37 (location 1 only)