SIPLACE-SX4-DX4-用户手册 - 第20页

Overview of the Modules C&P20, C&P20A and C&P20M head 2.2.1 Differentiation of the C&P20 heads 20 Service Manual SIPLACE SX4/DX4 2.2 2 . 2 C & P 2 0 , C & P 2 0 A a n d C & P 2 0 M h e a d C&a…

Overview of the Modules

2.1.1 Serial Number of Module Overview of SX4/DX4

Service Manual SIPLACE SX4/DX4 19

2 Overview of the Modules

Overview of the Modules

2.1

2.1 Overview of SX4/DX4

Overview of SX4/DX4

2.1.1

2.1.1 Serial Number of Module

Serial Number of Module

Overview of machines (using SX4 as example)

1. Location 1

2. Location 2

3. Location 3

4. Location 4

5. GCU, HCU, BoxPC

6. Power supply

The serial number of your SX4/DX4 placement machine

can be found on the typeplate (1) at location 1.

Overview of the Modules

C&P20, C&P20A and C&P20M head 2.2.1 Differentiation of the C&P20 heads

20 Service Manual SIPLACE SX4/DX4

2.2

2.2 C&P20, C&P20A and C&P20M head

C&P20, C&P20A and C&P20M head

2.2.1

2.2.1 Differentiation of the C&P20 heads

Differentiation of the C&P20 heads

Differenc es between CP 20/A/M

The C&P20A differs from the C&P20 in the following issues:

▪ New E/D transformer

▪ Improved linear guide rails at the segments

▪ Driver bearing

▪ Modified Z-axis (also used in C&P20 later on)

▪ Hoses

▪ FHE components

The C&P20M differs from the C&P20A in the following issue:

▪ Incremental encoder of the star motor

C&P20A

1. Star motor

2. Pressure control valve

3. DP drives (20 x)

4. Star with 20 nozzles

5. Component Camera

6. Intermediate distributor board

NOTICE

C&P20, C&P20A, C&P20M

The instructions apply in principle to all C&P20, C&P20A and C&P20M heads.

Any differences will be explicitly indicated.

► The different heads can be recognized according to the labeled stickers.

Overview of the Modules

2.2.1 Differentiation of the C&P20 heads C&P20 Nozzle Changer

Service Manual SIPLACE SX4/DX4 21

2.3

2.3 C&P20 Nozzle Changer

C&P20 Nozzle Changer

1. Cover (covering complete electronic and pneumatic

systems)

2. Toggle (six of them)

3. Nozzle magazine

4. Fastening screws

1. Cover (2 x 4 fastening screws)

2. Control board NC

3. Valve assembly

4. Swivel drive

5. Microswitch (six of them)

6. Green LED 3 mm