SIPLACE-SX4-DX4-用户手册 - 第21页
Overview of the Modules 2.2.1 Differentiation of the C&P20 heads C&P20 Nozzle Changer Service Manual SIPLACE SX4/DX4 21 2.3 2 . 3 C & P 2 0 N o z z le C h a n g e r C&P20 Nozzle Changer 1. Cover (covering…
Overview of the Modules
C&P20, C&P20A and C&P20M head 2.2.1 Differentiation of the C&P20 heads
20 Service Manual SIPLACE SX4/DX4
2.2
2.2 C&P20, C&P20A and C&P20M head
C&P20, C&P20A and C&P20M head
2.2.1
2.2.1 Differentiation of the C&P20 heads
Differentiation of the C&P20 heads
Differenc es between CP 20/A/M
The C&P20A differs from the C&P20 in the following issues:
▪ New E/D transformer
▪ Improved linear guide rails at the segments
▪ Driver bearing
▪ Modified Z-axis (also used in C&P20 later on)
▪ Hoses
▪ FHE components
The C&P20M differs from the C&P20A in the following issue:
▪ Incremental encoder of the star motor
C&P20A
1. Star motor
2. Pressure control valve
3. DP drives (20 x)
4. Star with 20 nozzles
5. Component Camera
6. Intermediate distributor board
NOTICE
C&P20, C&P20A, C&P20M
The instructions apply in principle to all C&P20, C&P20A and C&P20M heads.
Any differences will be explicitly indicated.
► The different heads can be recognized according to the labeled stickers.
Overview of the Modules
2.2.1 Differentiation of the C&P20 heads C&P20 Nozzle Changer
Service Manual SIPLACE SX4/DX4 21
2.3
2.3 C&P20 Nozzle Changer
C&P20 Nozzle Changer
1. Cover (covering complete electronic and pneumatic
systems)
2. Toggle (six of them)
3. Nozzle magazine
4. Fastening screws
1. Cover (2 x 4 fastening screws)
2. Control board NC
3. Valve assembly
4. Swivel drive
5. Microswitch (six of them)
6. Green LED 3 mm
4
1
4
3
2
5
1
6
5
4
3
2
Overview of the Modules
Twin Head 2.2.1 Differentiation of the C&P20 heads
22 Service Manual SIPLACE SX4/DX4
2.4
2.4 Twin Head
Twin Head
2.5
2.5 CPP Head
CPP Head
The TwinHead consists of 2 Pick&Place modules.
1. Module 1
2. Module 2, rotated by 180° compared to module 1.
3. Main board on relevant module
4. D axis
5. Linear motor Z axis
6. Z axis incremental measurement system
7. Camera lens hood TwinHead
X-Series S, SX4/DX4, X-Series, HF: [03001846-xx]
SX1/SX2/DX1/DX2 [03079524-xx]
CPP placement head with camera SST29
[03070108-xx]
CPP placement head without camera
[03053528-xx]
1. Intermediate distributor 1 and 2 (ID1, ID2)
2. Star motor (integrated in head housing)
3. DP axis (as direct drive)
4. Pressure control valve
5. Component camera (behind the intermediate distrib-
utor, standard: SST29)
6. Single core solution (SCS) – DP drive control
7. Holding circuit supply, integrated venturi nozzles and
valve assembly (valve terminal)
8. Z axis with return cylinder
9. Component sensor in the pick and place position (on
the underside)