SIPLACE-SX4-DX4-用户手册 - 第219页

Measuring Equipment and Tools Calibration Tool [03010565-xx] Service Manual SIPLACE SX4/DX4 219 4 4 M e a s u r in g E q u ip m e n t a n d T o o ls Measuring Equipment and Tools 4.1 4 . 1 C a lib r a t io n T o o l [ 0 …

100%1 / 298
Service Work
Vacuum Pump 3.14.6 Replacing the Circuit Breaker in the Connector Unit Box [03079445-xx]
218 Service Manual SIPLACE SX4/DX4
3.14.6
3.14.6 Replacing the Circuit Breaker in the Connector Unit Box [03079445-xx]
Replacing the Circuit Breaker in the Connector Unit Box [03079445-xx]
Parts, equipment and tools
▪ Circuit breaker 5SY6 3pol 6A C [03079445-xx]
Removal/Installation
The circuit breaker is located in the connector unit box. The connector unit box is located at the bottom
of the machine frame, at location 2.
► For more information about this, read section "3.14.3 Replacing the Connector Unit Box " [ ➙ 215].
See also
1.2 Preparatory Work... [ ➙ 12]
3.14.7
3.14.7 Replacing the Button in the Connector Unit Box [03072025-xx]
Replacing the Button in the Connector Unit Box [03072025-xx]
Parts, equipment and tools
▪ Button 5TE4 800 [03072025-xx]
Removal/Installation
The button is located in the connector unit box. The connector unit box is located at the bottom of the
machine frame, at location 2.
► For more information about this, read section "3.14.3 Replacing the Connector Unit Box " [ ➙ 215].
See also
1.2 Preparatory Work... [ ➙ 12]
3.14.8
3.14.8 Replacing the Relay Terminal Block in the Connector Unit Box [03086538-xx]
Replacing the Relay Terminal Block in the Connector Unit Box [03086538-xx]
Parts, equipment and tools
▪ Relay terminal block DEK-REL-G24/21 24VDC 1 Wech [03086538-xx]
Removal/Installation
The relay terminal block is located in the connector unit box. The connector unit box is located at the
bottom of the machine frame, at location 2.
► For more information about this, read section "3.14.3 Replacing the Connector Unit Box " [ ➙ 215].
See also
1.2 Preparatory Work... [ ➙ 12]
3.14.9
3.14.9 Replacing the Diode Terminal Block in the Connector Unit Box [03006763-xx]
Replacing the Diode Terminal Block in the Connector Unit Box [03006763-xx]
Parts, equipment and tools
▪ Diode terminal block 2.5 qmm gy 4L. with 1N4007 [03006763-xx]
Removal/Installation
The diode terminal block is located in the connector unit box. The connector unit box is located at the
bottom of the machine frame, at location 2.
► For more information about this, read section "3.14.3 Replacing the Connector Unit Box " [ ➙ 215].
See also
1.2 Preparatory Work... [ ➙ 12]
Measuring Equipment and Tools
Calibration Tool [03010565-xx]
Service Manual SIPLACE SX4/DX4 219
4
4 Measuring Equipment and Tools
Measuring Equipment and Tools
4.1
4.1 Calibration Tool [03010565-xx]
Calibration Tool [03010565-xx]
4.2
4.2 Calibration Tool [03034148-xx]
Calibration Tool [03034148-xx]
Use:
The calibration tool [03010565-xx] is used for calibration
of the DLM, CPP, P&P heads, TwinHead and PCB cam-
era.
Use:
The calibration tool is used for the following placement
heads:
▪ C&P20
▪ C&P20 A
▪ C&P20 M
▪ C&P20 P
▪ CPP (only at X4i S without stationary camera)
Measuring Equipment and Tools
Calibration Tools for Vision Systems
220 Service Manual SIPLACE SX4/DX4
4.3
4.3 Calibration Tools for Vision Systems
Calibration Tools for Vision Systems
4.4
4.4 Calibration Nozzle for TwinHead [03008862-xx]
Calibration Nozzle for TwinHead [03008862-xx]
4.5
4.5 Belt Tension Device [00326015-01]
Belt Tension Device [00326015-01]
Use:
The calibration tool [03010565-xx] is used to calibrate the
C&P6/12 placement heads in the D/X and HF machines.
▪ Another calibration tool is available for the C&P20
head of the X series:
Calibration tool [03034148-01] version for C&P20
head (for the component camera system type 23)
▪ Another calibration tool is available for machines with
4xx software:
Calibration tool [00316308-03] version II transparent
The various calibration tools for the different machine
types are listed here for the sake of completeness.
Use:
The calibration nozzle is used to calibrate the D axis of
the TwinHead or P&P head.
NOTICE!
This nozzle is no longer needed from SW705.03.
Use:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.