SIPLACE-SX4-DX4-用户手册 - 第26页
Overview of the Modules Pneumatic System 2.6.4 GCU 26 Service Manual SIPLACE SX4/DX4 2.7 2 . 7 P n e u m a t ic S y s t e m Pneumatic System The pneumatic system is located at locations 1, 3 and 4, behind the side covers…
Overview of the Modules
2.6.4 GCU Electrical System
Service Manual SIPLACE SX4/DX4 25
2.6.4
2.6.4 GCU
GCU
Overview of the Modules
Pneumatic System 2.6.4 GCU
26 Service Manual SIPLACE SX4/DX4
2.7
2.7 Pneumatic System
Pneumatic System
The pneumatic system is located at locations 1, 3 and 4, behind the side covers.
2.8
2.8 Gantries
Gantries
1. Location 3, behind the side cover: Elmo blower with
electrics, cooling air filter
2. Location 4, behind the side cover
3. Proportional controller for gantry group of placement
heads PA1/PA2
1. Location 1, behind the side cover: connection cou-
pling, main valve with compressed air filter, com-
pressed air displays
2. Location 1, at the bottom, in the machine base: com-
pressed air connection for gantry trailing cable and
vacuum pump option
3. 5/2 way valve [03062277-xx]
Main valve (X59) for NC, input, conveyor
4. 5/2 solenoid valve [00344974-xx]
Safety valve (X60) for tape cutter
5. Pressure regulator [03062103-xx]
1. Gantry trailing cables split for Y axis
2. Gantry trailing cables split for X axis
3. Gantry interface and Vision board
The Vision board is fitted on the gantry interface.
4. Y-Axis
5. Y axis scale
6. Y drive (primary)
7. X axis
8. X axis scale
9. Placement head (here: C&P20A)
10. X drive (primary)
11. Head adapter
Overview of the Modules
2.9.1 Single conveyor PCB Conveyor
Service Manual SIPLACE SX4/DX4 27
2.9
2.9 PCB Conveyor
PCB Conveyor
The SX4 machine is fitted with a dual or quad lane conveyor, depending on your configuration. DX4 ma-
chines are fitted with a single conveyor.
2.9.1
2.9.1 Single conveyor
Single conveyor
2.9.2
2.9.2 Dual Conveyor
Dual Conveyor
2.9.3
2.9.3 Quad Lane Conveyor
Quad Lane Conveyor
The single conveyor has one lane. In the standard ver-
sion, the fixed conveyor side wall is on the right.
1. Placement area 1
2. Placement area 2
3. Stopper (5 x)
4. Conveyor drive (2x)
5. Lifting tables (2x)
6. Installation position for conveyor control TSP 410
The dual conveyor has two conveyor lanes. In the stand-
ard version, the fixed conveyor side wall of each convey-
or lane is on the right-hand side.
1. Placement area 1
2. Placement area 2
3. Stoppers (5 x per conveyor lane)
4. Conveyor drive (4x)
5. Lifting tables (4x)
6. Conveyor control TSP410 (2x, under the covers)
The quad lane conveyor has four conveyor lanes. In the
standard version, the fixed conveyor side wall of each
conveyor lane is on the right-hand side.
1. Placement area 1
2. Placement area 2
3. Stoppers (3 stoppers (5 per conveyor lane)
4. Conveyor drive (4x)
5. Lifting tables (4x)
6. Conveyor control TSP410 (2x, under the covers)