00197674-01-UM-E-Series-EN-12-2014 - 第160页
3 Technical data and assemblies User manual SIPLACE E 3.10 Changeover table for SIPLACE E From software version SC 708.0 12/2014 Edition 160 3 Fig. 3.10 - 6 Changeover table, front view (1) Contact for switching the s af…
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.10 Changeover table for SIPLACE E
159
3.10.5 Changeover table for SIPLACE E
The front slider guides of the feeder modules are placed on the insertion aid. As it is pushed in,
the guides of the feeder module slide on the guide profile as far as the stop bar. A centering hole
on the stop bar holds the "front" centering pin of the SIPLACE SmartFeeder E. At the same time,
the locking latch of the changeover table latches onto the locking roller of the feeder module. The
"back" centering pin on the top of the feeder module is held by the recess in the centering bar.
3
Fig. 3.10 - 5 Changeover table, back view
(1) Insertion aid
(2) Guide profile
(3) Locking bar to guide and lock the SIPLACE SmartFeeder E in place
(4) Centering bar
(1)
(2)
(3)
(4)
3 Technical data and assemblies User manual SIPLACE E
3.10 Changeover table for SIPLACE E From software version SC 708.0 12/2014 Edition
160
3
Fig. 3.10 - 6 Changeover table, front view
(1) Contact for switching the safety switch of the EMERGENCY STOP circuit
(2) Centering pin on the changeover table
(3) Waste tape container
(1)
(2)
(2)
(3)
User manual SIPLACE E 3 Technical data and assemblies
From software version SC 708.0 12/2014 Edition 3.10 Changeover table for SIPLACE E
161
3.10.6 Tape container
3.10.6.1 Description
The tape container can hold tape reels up to 19" (483 mm) in diameter. The insertion of separating
plates is described in section 5.10.4
page 228.
3
Fig. 3.10 - 7 Changeover table, SIPLACE E, with tape container
(1) Tape container with separating plates
(2) Waste tape container
3
PLEASE NOTE
Using spindles
SIPLACE E changeover tables do not generally need spindles.
Use spindles if the error message "Timeout" appears frequently on the SIPLACE
SmartFeeder E.
(1)
(2)