00197674-01-UM-E-Series-EN-12-2014 - 第165页
User manual SIPLACE E 4 Setting up and commissioning From software version SC 708.0 12/2014 Edition 4.1 Transportatio n and delivery configuration 165 4 Setting up and commissioning 4.1 Transportation and delivery config…
3 Technical data and assemblies User manual SIPLACE E
3.10 Changeover table for SIPLACE E From software version SC 708.0 12/2014 Edition
164
User manual SIPLACE E 4 Setting up and commissioning
From software version SC 708.0 12/2014 Edition 4.1 Transportation and delivery configuration
165
4 Setting up and commissioning
4.1 Transportation and delivery configuration
4.1.1 Shipping packaging
Within Europe, the machine and changeover tables will be shipped on two wooden pallets, pack-
aged in plastic film. Outside Europe, the machine and changeover tables are supplied in wooden
crates.
4.1.1.1 Shipping packaging dimensions
The dimensions of the pallets and wooden crates are listed in the following table:
4
Fig. 4.1 - 1 Transport crate - dimensions in millimeters
(A) Pallet jack attachment points
Machine (L x W x H) Changeover table (L x W x H)
Wooden
crate
2430 mm x 1530 mm x 1620 mm 1050 mm x 1050 mm x 1150 mm
4 Setting up and commissioning User manual SIPLACE E
4.1 Transportation and delivery configuration From software version SC 708.0 12/2014 Edition
166
4.1.1.2 Weight of machine when ready for dispatch
The following table contains the weights of the machines prepared for dispatch, including packag-
ing.
4
4.1.2 Checking a delivery
Store the machine in the packaging until room temperature has been reached. There is oth-
erwise a risk of condensation occurring.
Check the delivery for damage.
Check the shock sensors on the transportation crate.
Unpack the machine and the accessories and check the delivery for completeness (reference
delivery note).
Document the results in the installation report /acceptance protocol.
4.1.3 Configuration when delivered
The machine is configured as follows when delivered:
– The track on the single conveyor is set to a width of 210 mm. This width setting will be import-
ant when fine-tuning the machine.
– The monitor is dismantled from the operator panel (HMI).
– The operator panel (consists of indicator lamps, keyboards and support plates) is dismantled
from the machine.
– The gantry axis is fixed with shipping braces.
Machine Dispatch within Europe Dispatch overseas
SIPLACE E 2,080 kg 2,080 kg
Changeover table 180 kg 180 kg