00197674-01-UM-E-Series-EN-12-2014 - 第22页

1 Introduction User manual SIPLACE E 1.3 Machine description From software version SC 708.0 12/2014 E dition 22 1.3 Machine description 1.3.1 The SIPLACE principle The placement heads pick up the components from the feed…

User manual SIPLACE E 1 Introduction

From software version SC 708.0 12/2014 Edition 1.2 Double sided SIPLACE E

The double sided SIPLACE E placement machines demonstrate

– High precision

– Placement performance up to the high end process range

– A wide ranging component range from 01005 components to a size of 200 mm x 110 mm.

Following placement methods are possible for processing the components:

– Collect&Place and

– Pick&Place

The SIPLACE E placement machine consists one gantry. For an overview of the placement head

configuration, refer to section 3.1.1

from page 99.

These can be quickly and accurately positioned by linear motors, moving independently of one

another in the X and Y directions.

The SIPLACE E machine supports the SIPLACE single conveyor.

There are two locations available for supplying components.One change over table on location 1

and one change over table on location 2 with 60 tracks.

1 Introduction User manual SIPLACE E

1.3 Machine description From software version SC 708.0 12/2014 Edition

1.3 Machine description

1.3.1 The SIPLACE principle

The placement heads pick up the components from the feeder modules (fixed position) on the

changeover tables or from the trays of the manual tray carriers or automatic tray changer (JTF-

MW) and then place the waiting boards.

The SIPLACE E placement machine has one placement area and a single conveyor.

The principle of "stationary component supply" and "stationary PCB", which have proven them-

selves in the other SIPLACE machines, offer a range of decisive benefits:

– Refilling components and splicing on tapes does not cause downtime.

– The vibration-free component feeder means that even the smallest components (e.g. 03015)

are picked up reliably.

– The PCB, which does not move during the placement process, prevents the components slip-

ping.

– The combination of placement heads with nozzle changers always guarantees an optimum

nozzle configuration for every placement process, thus minimizing traversing paths and opti-

mizing the placement sequence.

High flexibility, efficiency and reliable setups are the guarantee for top productivity in the SIPLACE

machines.

Minimum down times increase utilization and thus help to increase productivity.

User manual SIPLACE E 1 Introduction

From software version SC 708.0 12/2014 Edition 1.3 Machine description

1.3.2 Machine serial number

The serial number of the machine can be found below the main power switch at location 1.

Fig. 1.3 - 1 Position of type plate with serial number

(T) Direction of travel

(1) Type plate

(1)