00197674-01-UM-E-Series-EN-12-2014 - 第23页
User manual SIPLACE E 1 Introduction From software version SC 708.0 12/2014 Edition 1.3 Machine descr iption 23 1.3.2 Machine s erial number The serial number of the machin e can be found below the main po wer switch at …
1 Introduction User manual SIPLACE E
1.3 Machine description From software version SC 708.0 12/2014 Edition
22
1.3 Machine description
1.3.1 The SIPLACE principle
The placement heads pick up the components from the feeder modules (fixed position) on the
changeover tables or from the trays of the manual tray carriers or automatic tray changer (JTF-
MW) and then place the waiting boards.
The SIPLACE E placement machine has one placement area and a single conveyor.
The principle of "stationary component supply" and "stationary PCB", which have proven them-
selves in the other SIPLACE machines, offer a range of decisive benefits:
– Refilling components and splicing on tapes does not cause downtime.
– The vibration-free component feeder means that even the smallest components (e.g. 03015)
are picked up reliably.
– The PCB, which does not move during the placement process, prevents the components slip-
ping.
– The combination of placement heads with nozzle changers always guarantees an optimum
nozzle configuration for every placement process, thus minimizing traversing paths and opti-
mizing the placement sequence.
High flexibility, efficiency and reliable setups are the guarantee for top productivity in the SIPLACE
machines.
Minimum down times increase utilization and thus help to increase productivity.
User manual SIPLACE E 1 Introduction
From software version SC 708.0 12/2014 Edition 1.3 Machine description
23
1.3.2 Machine serial number
The serial number of the machine can be found below the main power switch at location 1.
1
Fig. 1.3 - 1 Position of type plate with serial number
(T) Direction of travel
(1) Type plate
(1)
1 Introduction User manual SIPLACE E
1.3 Machine description From software version SC 708.0 12/2014 Edition
24
1.3.3 EC Declaration of conformity
The product/device described below
Manufactured by
ASM Assembly Systems Singapore Pte ltd
2 Corporation Road
#01-03 Corporation Place 1
1
conforms to the regulations and standards listed in the EU Declaration of Conformity provided.
1.3.4 Use as prescribed
The product may only be used for the areas of application specified in the catalogues and techni-
cal descriptions i.e. for the placement of SMD components and may only be used together with
the third party devices and components recommended or approved by ASM Assembly Systems
Singapore Pte ltd. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems Singapore Pte ltd will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product Type Item no.
SIPLACE E
Placement machine
Base machine 03105433-xx