00197674-01-UM-E-Series-EN-12-2014 - 第289页

User manual SIPLACE E 6 Station extensions From software version SC 708.0 12/2014 Edition 6.3 SIPLACE JTF-M W 289 6.3.5.3 Danger of Crushing at SIPLACE JTF-MW Areas of the SIPLACE JTF-MW at which there is a danger of cru…

100%1 / 308
6 Station extensions User manual SIPLACE E
6.3 SIPLACE JTF-MW From software version SC 708.0 12/2014 Edition
288
6.3.5 Safety Instructions
6.3.5.1 Safety of Operators and Other Persons
Module operators may only carry out work for which they have been adequately qualified and
with which they are totally familiar!
NEVER open one of the covers if you are not totally familiar with the use and functioning of
the module! Do not open the covers during operation unless you are told to do so in this Man-
ual or in the station software dialog!
For your own safety, wear work clothes that conform to the guidelines of the professional as-
sociation, i.e. no wide sleeves etc.
Reduce the risks by not wearing scarves, chains or ties at your work post.
People with long hair must wear a protective head covering.
6.3.5.2 Safety of Plant and Equipment
Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the module and system!
The modules must always be set up, retooled and maintained by appropriately qualified per-
sonnel.
Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices.
WARNING
Voltage
The module is electrically driven. When electrical devices are in use, certain parts carry dangerous
voltage levels!
Before performing any work to parts which conduct electricity, switch the machine off at the main
switch and unplug the Lemosa socket for the adapter, to disconnect the power between the mod-
ule and the machine.
– There is a risk of death, severe injury and/or considerable damage to equipment if these instruc-
tions are not followed.
User manual SIPLACE E 6 Station extensions
From software version SC 708.0 12/2014 Edition 6.3 SIPLACE JTF-MW
289
6.3.5.3 Danger of Crushing at SIPLACE JTF-MW
Areas of the SIPLACE JTF-MW at which there is a danger of crushing 6
– Magazine and pusher assembly
– Tray clamp
– Cylinder for tray clamp
– Feeder base - movable tray stack
– Recess for separation rods
– Feeder base - movable tray stack
– Tray return assy
– Feeder base - drive belt
6.3.5.4 Safety Instructions for Transporting the Module
6
DANGER
Danger of crushing
There is a risk of injuries by pinch points or a risk of crushing by reaching into the feeder or from
loose clothing which could get into the feeder during operation.
Observe correct handling and the safety instructions.
Do not reach into the feeder while it is running.
Maintain an adequate safety distance.
CAUTION
High weight
The heavy weight of the module could cause injuries if the module is not handled correctly.
Do not lift or carry the module alone.
During removal, remember that the SIPLACE JTF-MW (~ 60 kg) is heavy. You might need
to enlist the help of a second person.
6 Station extensions User manual SIPLACE E
6.3 SIPLACE JTF-MW From software version SC 708.0 12/2014 Edition
290
6.3.5.5 Warning labels on the SIPLACE JTF-MW
6
Fig. 6.3 - 4 Warning labels on SIPLACE JTF-MW
– W204, item no. 03009343-01
Warning label W204
6
Quantity per SIPLACE JTF-MW: 3
W 204
W 204
W 204