00197674-01-UM-E-Series-EN-12-2014 - 第306页
7 Cleaning and Checking User manual SIPLACE E 7.5 Cleaning and Checking Intervals Nozzles From software versio n SC 708.0 12/2014 Edition 306
User manual SIPLACE E 7 Cleaning and Checking
From software version SC 708.0 12/2014 Edition 7.5 Cleaning and Checking Intervals Nozzles
305
7.5 Cleaning and Checking Intervals Nozzles
7
– Vacuum generator:
– Installation/removal
– Clean the Venturi nozzles
– Blow air through Venturi nozzles
– Clean and grease the O-rings
– Clean and blow through the vacuum generator
block.
– Silencer: remove
– Silencer: clean holes to the Venturi nozzles
– Silencer: check for dirt
– Silencer: check the plastic fixtures
6/6 X
– Component sensor
– Cleaning the Component Sensor
1/1 X
– Installation and removal of the head front section
6/6 X
– Calibrate and measure
20/25 X
Cleaning and Checking tasks
SIPLACE CP12/CP6
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Cleaning and Checking tasks
Nozzles
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
– Cleaning/Replacing the Ceramic Nozzles
2X
– Replacing the Plastic Nozzles
2X
7 Cleaning and Checking User manual SIPLACE E
7.5 Cleaning and Checking Intervals Nozzles From software version SC 708.0 12/2014 Edition
306