00197674-01-UM-E-Series-EN-12-2014 - 第55页
User manual SIPLACE E 2 Operational safety From software version SC 708.0 12/2014 Edition 2.2 Warning label s 55 2.2.3 Warning label on the changeover table insert Fig. 2.2 - 8 Warning labels on the changeover table inse…
2 Operational safety User manual SIPLACE E
2.2 Warning labels From software version SC 708.0 12/2014 Edition
54
2.2.2.4 Warning label W204
2
W204 in fig. 2.2 - 5, page 49, item no. 03009343-01
Quantity per machine:
SIPLACE E double sided: 1 2
SIPLACE E single sided: 1 2
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms, hands or
head.
Be cautious when doing troubleshooting or correction that
needs to access the inside of the machine.
User manual SIPLACE E 2 Operational safety
From software version SC 708.0 12/2014 Edition 2.2 Warning labels
55
2.2.3 Warning label on the changeover table insert
Fig. 2.2 - 8 Warning labels on the changeover table insert
In fig. 2.2 - 8, page 55, hand crushing label, item no. 03118888-01 (2 labels on the left side and 2
labels on the right side).
Hand crushing
Hand crushing
Hand crushing
Hand crushing
2
RISK OF HAND CRUSHING!
Docking in and docking out the changeover table can result into crushing of
hands.
Docking in and docking out the changeover table.
Observe the description in Section 5.16 on page 246.
2 Operational safety User manual SIPLACE E
2.2 Warning labels From software version SC 708.0 12/2014 Edition
56
2.2.4 Warning label W205 on the tape cutter
2
Fig. 2.2 - 9 Warning label W205 on the top of the tape cutter
– W205, item no. 03009344-01
2
WARNING
Risk of cuts!
Risk of cutting when working on the cutter!
Disconnect the machine from the power and compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter.
W205