00197674-01-UM-E-Series-EN-12-2014 - 第77页
User manual SIPLACE E 2 Operational safety From software version SC 708.0 12/2014 Edition 2.7 Safety features 77 2.7 Safety features 2.7.1 Protective covers The protective hoods and cove rs serve as p rotective devices w…
2 Operational safety User manual SIPLACE E
2.6 Additional safety instructions for the machines From software version SC 708.0 12/2014 Edition
76
2.6 Additional safety instructions for the machines
2.6.1 Safety instructions for docking the changeover table in or out
2
2
2
2
2.6.2 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the changeover table for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.9.2
, page 224.
WARNING
Operation only with changeover table!
The placement machine may only be operated if there is a changeover table present and
docked at each location.
Fill any free locations with dummy feeder modules as described in section 2.7.5.1,
page 86.
WARNING
DANGER OF CRUSHING!
Risk of crushing limbs when docking and undocking the changeover table.
Always dock/undock the changeover table alone.
CAUTION
Risk of breaking handles!
Risk of breaking handles when transporting the changeover table.
When transporting the changeover table, do not lift it by its handles.
CAUTION
Risk of injuring limbs!
Risk of injuring limbs when docking and undocking.
When docking and undocking, make sure that there are no body limbs in the travel
area of the changeover table.
User manual SIPLACE E 2 Operational safety
From software version SC 708.0 12/2014 Edition 2.7 Safety features
77
2.7 Safety features
2.7.1 Protective covers
The protective hoods and covers serve as protective devices which prevent unauthorized access
to the inside of the machine.
2
2
Fig. 2.7 - 1 Protective covers
(1) Protective cover location 1
(2) Protective cover location 2
The travel range of the gantry is protected with two covers which can be opened (items 1 and 2).
CAUTION
Risk of damage!
The protective covers and other covers could be damaged if too much force is exerted.
Do not stand on or climb up the protective covers and other covers.
(1)
(2)
2 Operational safety User manual SIPLACE E
2.7 Safety features From software version SC 708.0 12/2014 Edition
78
Function 2
If the protective cover is swung upwards, the power supply to the gantry axes will be immediately
interrupted. The gantry axes stop moving. The message "Close cover" is displayed on the screen.
Close the protective covers and press the START button (item 2 in fig. 2.7 - 2), to continue
placement.
2
Fig. 2.7 - 2 Position of the start buttons (white) on the machine
(1) STOP button (black) on machine
(2) Start button (white) on the machine
(3) EMERGENCY STOP button
(2)
(1)
(3)