CX200-4(Maint) - 第23页
(2) V acuum System (3) Dust Collector and W aste T ape Box W aste T ape Box 1D5 Daily Cleaning Remove the tape chips. * T ape chips must be removed every 8 hours. Filter of Dust Collector ޓޓޓޓޓ 1W2 Weekly Cleaning D…
1.3.3 Inspection, Cleaning, and Lubrication Spots
(1) Air Source
1.3 Maintenance Spots
01 10-003 1-11 AFO01ETRP
Fig. 4A10
(2) Vacuum System
(3) Dust Collector and Waste Tape Box
Waste Tape Box 1D5
Daily Cleaning
Remove the tape chips.
* Tape chips must be removed every 8 hours.
Filter of Dust Collectorޓޓޓޓޓ1W2
Weekly Cleaning
Detach the air filter and clean it with a vacuum
cleaner or an air gun.
If the filter becomes defective, replace it with a
new one.
0110-003 1-12 AFO01ETRP
1.3 Maintenance Spots
Fig. 4A11
Fig. 4A12
(4) Component Recognition Section
(5) Main Section of Machine Intermediate Base/Component Receiving Box
Fig. 4A14
1.3 Maintenance Spots
0110-003 1-13 AFO01ETRP
Use a suction force (a vacuum cleaner) for cleaning.
Do not blow air with an air gun.
If the component recognition section is dirty or
dusty, incorrect recognition will result.
CAUTION
Fig. 4A13