CX200-4(Maint) - 第253页

Recognition Error ID Item Description 01 31 3 00001 Error in “Camera POSITION X or POSITION Y” ---- Data. 01 31 3 00003 Error in “Camera ANGLE” Data. ---- 01 31 3 00007 Error in “Camera 1 – 2 X or Y” Data. ---- 01 32 3 0…

4.3 Recognition Error IDs and Remedial Procedures

4.3.1 Recognition Communication and Data Errors

AA BB C DDDDD

Detail Code

Secondary Error Classification

1: Recognition Communication

Data Range Error

2: Input Data Assembly Error

3: Input Data Error

Primary Error Classification

10 to 70: Communication Commands

90: Communication Procedure

91: Command Error

92: Response Error

Classification (01) of Recognition Functions

When an error ID other than the described ones is issued, con-

tact our service personnel for some advice.

Table 4B9

Recognition Error ID Item Description

01 ** 1 ***** Error in Recognition Communication Data -----

(Cause) An error was found in the recognition

communication data.

(Remedy 1) Contact our service personnel for details.

01 21 3 00000 “P.E.C. Lighting #2“ is not Connected! -----

(Cause) Failed in confirmation to the connection of the lighting unit for ceramic boards.

(Remedy 1) Contact our service personnel for some advice.

01 30 3 00001 Error in “Camera MAGNIFICATION X or -----

MAGNIFICATION Y“ Data.

(Cause) Wrong parameters are set.

(Remedy 1) Set the correct data.

4.3 Recognition Error IDs and Remedial Procedures

01 10-003 2-163 AFO01ETRP

Note

Recognition Error ID Item Description

01 31 3 00001 Error in “Camera POSITION X or POSITION Y” ----

Data.

01 31 3 00003 Error in “Camera ANGLE” Data. ----

01 31 3 00007 Error in “Camera 1 – 2 X or Y” Data. ----

01 32 3 00002 Error in “Camera GAIN or LEVEL” Data. ----

01 33 3 00001 Error in “Nozzle Offset High Mag. X or Y” Data. ----

01 33 3 00002 Error in “Nozzle Offset Low Mag. X or Y” Data. ----

01 33 3 00004 Error in “Nozzle O.D.Size” Data. ----

01 33 3 00005 Error in “Nozzle I.D.Size” Data. ----

01 33 3 00008 Error in “Nozzle V-Groove Size” Data. ----

01 34 3 00001 Error in “Indidual Nozzle Gain or Level” Data. ----

01 35 3 00001 Error in “Nozzle High or Low level offset” Data. ----

01 36 3 00001 Error in “Nozzle Position Offset” Data. ----

01 37 3 00001 Error in “Head Center X or Y Offset” Data. ----

(Cause) Wrong parameters are set.

(Remedy) Set correct parameters.

4.3 Recognition Error IDs and Remedial Procedures

01 10-003 2-164 AFO01ETRP

Recognition Error ID Item Description

01 38 2 00000 Unavailable fiducial mark code was set. ----

01 38 2 00001 “Mark Size D2” is too big, compared with “D1”. ----

01 38 2 00002 “Mark Size D3” is too big, compared with “D1”. ----

01 38 2 00003 “Mark Size D2” is too big, comapred with“D3”. ----

01 38 2 00004 “Window Size” is smaller than “Mark Size”. ----

01 38 2 00005 “Mark Size D2” is not set. ----

01 38 2 00006 “Mark Size D3” is not set. ----

01 38 3 00001 Error in “P.C.B Recognition Mark Data Mark Size ----

D1 or D2 or D3” Data.

01 38 3 00003 Error in “P.C.B Recognition Mark Data Window ----

Size” Data.

(Cause) Wrong parameters are set for the P.E.C. recognition function.

(Remedy) Refer to “Section 2 Pattern Program” in “Vol. 3” for details and set correct

parameters.

4.3 Recognition Error IDs and Remedial Procedures

01 10-003 2-165 AFO01ETRP