CX200-4(Maint) - 第4页
About the Instruction Manual V olume 5: Pneumatic and Electrical Diagrams This provides various kinds of material such as pneu- matic and electrical circuit diagrams for those who are in charge of machine servicing opera…
About the Instruction Manual
• This instruction manual is classified into several volumes on subjec-
tive basis as follows.
Volume 1: Operation (Operator)
This describes the fundamentals for those who read
this instruction manual and use the component place-
ment machine for the first time.
Coverage: This covers the checking items, the safety
precautions, the scope of the machine, the
preparatory and ending procedures of au-
tomatic operation, and the troubleshooting
on simple errors.
Volume 2: Operation (Supervisor)
This describes the general items related to machine
operations for those who have learned how to operate
the machine.
Coverage: This covers the specifications and func-
tions of the machine, various menus re-
lated to the program change, automatic
operations, and maintenance.
Volume 3: Programming and Machine Data
This describes various data for a programmer (s) who
creates pattern programs and a supervisor who must
understand the meanings of various data.
Coverage: This covers the various data such as pat-
tern program, component library data and
the menus for production control and sys-
tem settings.
Volume 4: Maintenance and Troubleshooting
This describes periodic maintenance operations,
troubleshooting, etc., for those who use this machine.
Coverage: This covers periodic maintenance opera-
tions, the list of consumables and servic-
ing parts, troubleshooting on simple errors,
and the remedial measures after “ERROR”
window.
01 10-003 2
AFO01ETRP
Fig. 4X2
Fig. 4X3
Fig. 4X4
Fig. 4X5
About the Instruction Manual
Volume 5: Pneumatic and Electrical Diagrams
This provides various kinds of material such as pneu-
matic and electrical circuit diagrams for those who are
in charge of machine servicing operations.
Coverage: Pneumatic Diagram, Parts Location, Elec-
trical Circuit Diagrams, etc.
COMPONENT LIBRARY:
This describes an explanation of component library data
and how to create it.
• This manual may not be copied, in whole or part, with-
out written consent of the publisher.
• This manual should be regarded as part of the ma-
chine and the contents comply with all the specifica-
tions regarding the purchased machine. Please keep
this manual within reach to serve as a handy tool in
completely understanding the workings of this ma-
chine.
• The contents of this manual are subject to change
without prior notice.
01 10-003 3
Afo01ETRP
Fig. 4X6
Fig. 4X7
Contents
Page
Before Use ......................................... 1
About the Instruction Manual ........................... 2
Contents ........................................... 4
Checking Items ...................................... 6
Safety Precautions ................................... 7
Section 1 Maintenance
......................... 1- A
1. Periodic Maintenance ............................. 1- 1
1.1 Precautionary Items before Maintenance ............ 1- 1
1.2 Preparation for Maintenance ...................... 1- 2
1.2.1 Preparation for Cleaning ....................... 1- 2
1.2.2 Preparation for Lubrication ..................... 1- 2
1.3 Maintenance Spots ............................. 1- 8
1.3.1 General View ................................ 1- 8
1.3.2 Understanding of Maintenance
Items on Each Section ............... 1-10
1.3.3 Inspection, Cleaning, and Lubrication Spots........ 1-11
1.4 Maintenance Method ............................ 1-45
1.4.1 Air Source .................................. 1-45
1.4.2 Filter Replacement of Head Section .............. 1-46
1.4.3 Cleaning of Vacuum Nozzle ..................... 1-47
1.4.4 Detachment and Attachment of Vacuum Nozzle ..... 1-48
1.4.5 Disassembly, Cleaning and Lubrication of
Miniature Stroke Bearing ............. 1-54
1.4.6 Lamp Replacement of Light Source Device for
Recognition Lighting ................ 1-62
1.4.7 Replacement of Cutter Blade ................... 1-64
1.4.8 Cleaning of Linear Scale/Encoder Head ........... 1-65
1.5 Maintenance Check List ......................... 1-67
1.5.1 Daily Maintenance ............................ 1-67
1.5.2 Weekly Maintenance .......................... 1-68
1.5.3 Monthly Maintenance ......................... 1-69
1.5.4 Every 3 Months Maintenance ................... 1-71
1.5.5 Every 6 Months Maintenance ................... 1-73
2. Lists of Consumables and Important Servicing Parts ..... 1-74
2.1 Lists of Consumables ........................... 1-74
2.2 Lists of Important Sevicing Parts ................... 1-75
01 10-003 4 AFO01ETRP