CX200-4(Maint) - 第48页

Cam Follower 3M20 Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1) Apply grease with a dispense gun. * Use No. 18 (green) nozzle. Linear Guide (Horizontal Plane) 3M21 Every 3 Months Lubrication (DAPHNE EPONEX GREA…

100%1 / 299
1.3 Maintenance Spots
0110-003 1-36 AFO01ETRP
Fulcrums 1M34
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Inject grease from the grease nipple with a
grease gun.
* Use the U- and N-type attachments.
U-Type N-Type
Clutch Surface 1M35
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply the grease by hand or using a brush.
Lever Surface 1M36
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply the grease by hand or using a brush.
Outer Circumference of Bearing 1M37
Every Month Lubrication
(NEW MOLYNOC GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 19 (brown) nozzle.
No.19
Fig. 4A44 Front View of Machine
(21) Placement Up/Down Section
Cam Follower 3M20
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a dispense gun.
* Use No. 18 (green) nozzle.
Linear Guide (Horizontal Plane) 3M21
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Wipe off the old grease with a rag and inject
new one into the oil inlet with a dispense gun.
Grease must also be applied to the ball
surfaces.
A. Oil Inlet
* Use No. 18 (green) nozzle.
B. Ball Surface
* Use No. 19 (brown) nozzle.
Grease should be applied every 3 months after
the initial month.
Linear Guide (Horizontal Plane) 3M22
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Wipe off the old grease with a rag and inject
new one into the oil inlet with a dispense gun.
Grease must also be applied to the ball
surfaces.
A. Oil Inlet
* Use No. 18 (green) nozzle.
B. Ball Surface
* Use No. 19 (brown) nozzle.
Grease should be applied every 3 months after
the initial month.
Roller Rests 3M23
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 3)
Apply grease with a dispense gun.
* Use RR-Type nozzle.
Fulcrum 3M24
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Apply grease with a grease gun.
* Use the U- and N-type attachments.
Grease should be applied every 3 months after
the initial month.
U Type
N Type
Fig. 4A45
Placement Up/Down Section
1.3 Maintenance Spots
0110-003 1-37 AFO01ETRP
(22) Tape Feed Unit Section
1.3 Maintenance Spots
0110-003 1-38 AFO01ETRP
Fig. 4A46