CX200-4(Maint) - 第78页
1.5 Maintenance Check List This session describes how to perform the maintenance work periodi- cally . Use the tables below as check lists. Refer to “1.3 Maintenance Spots” for the maintenance of each indi- vidual spots …
(5) Pass the head cleaning paper through the clearance and slide it
right and left 10 to 20 times, keeping the effective length of the stoke.
Fig. 4A87
(6) Pull out the head cleaning paper such that the folded part (folding
mark) should pass through the clearance between the encoder head
and the scale holder as shown below.
Fig. 4A88
(7) Follow Steps (2) through (6) again, using new head cleaning paper.
(8) After the cleaning, move the feeder carriage sideways and clean
the linear scale with a cotton swab soaked in alcohol (absolute etha-
nol).
(9) Power up the machine and perform “Reference Mark Detection Mode”
to check the feeder carriage movement.
01 10-003 1
66 AFO01ETRP
1.4 Maintenance Method
1.5 Maintenance Check List
This session describes how to perform the maintenance work periodi-
cally.
Use the tables below as check lists.
Refer to “1.3 Maintenance Spots” for the maintenance of each indi-
vidual spots of the machine.
1.5.1 Daily Maintenance
Table 4A20
1.5 Maintenance Check List
01 10-003 1-67 AFO01ETRP
Air Source
Vacuum System
Dust Collector and
Waste Tape Box
Component
Recognition Section
Main Body Section
Intermediate Base/
Component
Receiving Box
Cutter Section
Main Air Pressure
Air Blowing Pressure
Sub Air Pressure
Vacuum Pressure
Waste Tape Box
Ring Lighting
Upper Surface of
Glass
Upper Surface of
Intermediate Base
Component
Receiving Box
Component Drop
Prevention Cover
1D1
1D2
1D3
1D4
1D5
1D6
1D7
1D8
1D9
4A10
Checking
4A11 Checking
4A12 Cleaning
4A13 Cleaning
4A14 Cleaning
4A15 Cleaning
-----
-----
-----
-----
-----
-----
-----
-----
-----
Lens
Cleaning Cloth
Vacuum
Cleaner
Vacuum
Cleaner
Maintenance Spots
Description Grease
Cleaning
tools,
Nozzles, etc.
Check
Name
No.
Fig.
No.
1.5.2 Weekly Maintenance
Table 4A21
1.5 Maintenance Check List
01 10-003 1-68 AFO01ETRP
-----
Vacuum Cleaner
or Air Gun
Vacuum Cleaner
Vacuum Cleaner
Vacuum Cleaner
Oiled Rag
See Fig. 4A20
Cotton Swap
soaked in Alchol
-----
Vacuum Cleaner
Air Source
Dust Collector and
Waste Tape Box
X/Y Table Section
Head Section
Linear Measure
Detection Section
Main Body Driving
Section
Cutter Section
Drain
Dust Collector
Filter
Upper Surface of
X/Y Table
Surroundings of
X/Y Base
Upper Surface of
X/Y Ball Screw Cover
X/Y Linear Guide Rails
Vacuum Nozzle
Light Projecting/
Receiving Glass
Oil Gauge of Rotary
Turret
Waste Tape Chute
1W1
1W2
1W3
1W4
1W5
1W6
1W7
1W8
1W9
1W10
4A10
Cleaning
4A16
-----
4A12 Cleaning
Cleaning
Cleaning
Cleaning
4A17 Cleaning
4A20 Cleaning
4A24 Cleaning
4A25 Checking
4A27-1 Cleaning
-----
-----
-----
-----
-----
-----
-----
-----
-----
Maintenance Spots
Description Grease
Cleaning
tools,
Nozzles, etc.
Check
Name
No.
Fig.
No.