CX200-4(Maint) - 第91页

1 . 2 “CHECK” Windows 1.2.1 “CHECK” Windows • Window Layout When the machine is not reset to its normal condition after an operator makes an error operation or an error occurs in the operation system, a window like the f…

1. Scope

1.1 Scope of Troubleshooting

The troubleshooting is composed as follows.

Fig. 4B1

01 10-003 2-1

AFO01ETRP

1. Scope

Error ID (6 digits)

Recognition Error ID (10 digits)

1.2 “CHECK” Windows

1.2.1 “CHECK” Windows

• Window Layout

When the machine is not reset to its normal condition after an operator

makes an error operation or an error occurs in the operation system, a

window like the following opens.

Fig. 4B2 Example of “CHECK” Window

• Window Composition

*1 Check Message

A check message is issued and displayed.

Refer to “1.2.2 List of Check Messages” for details.

*2 Display Field A

Displayed is the scope of the check message.

*3 Display Field B

Displayed are the details of the check message.

01 10-003 2-2

AFO01ETRP

1.2 “CHECK” Windows

Note

*4 [OK] Button

When pressed, this button closes the "CHECK" window.

*5 Saving the check message

The check message is saved as a production message.

••

• Reset Procedure from “CHECK” Window

(1) Take a note of the issued check message.

Note: Be sure to take a note of the check message. If you forget

the contents of the message, the machine cannot be reset

correctly to its normal condition.

(2) Press the [OK] button. The original window resumes.

(3) Follow the contents of the check message to reset the machine

correctly to its normal condition.

01 10-003 2-3

AFO01ETRP

1.2 “CHECK” Windows