CX200-4(Maint) - 第95页

Check Code Display Section A Display Section B 030303 Head Bypass The specified nozzle is bypassed. 030401 Operation Please input barcode data by manual input screen. Requirement 030402 Operation Please check the operati…

100%1 / 299
Check Code Display Section A Display Section B
030120 Operator’s Error Check the feeder. (the feeder checker)
030121 Operator’s Error Remove the P.C.B. at the inlet of input buffer cnvr.
030122 Operator’s Error Check the program name of bar code.
(the P.C.B. is on the input cnvr.)
030123 Operator’s Error It isn’t practicable with “set up” mode.
030124 Operator’s Error It isn’t practicable with “P.C.B. clamp valve” menu select.
030125 Operator’s Error Please read of barcode label on the P.C.B.
030126 Operator’s Error The fdr. was not recorded SIF data exists.
Please record by mnl. operation.
030128 Operator’s Error The fdr. was not recorded SIF data exists.
Please record by mnl. operation.
03012a Operator’s Error Remove the P.C.B. at the input cnvr.
03012b Operator’s Error Cannot start by external start protection.
03012c Operator’s Error Please change enable mode into disable mode.
(serial out mode)
03012d Operator’s Error Remove the P.C.B. at the input cnvr.
(the P.C.B. not enable B.B.R. info.)
03012e Operator’s Error Cannot start by the unit P.C.B. B.B.R. mode (conveyor).
03012f Operator’s Error Remove the P.C.B. at middle position of input buffer cnvr.
030130 Operator’s Error Cannot start by external start protection. (F1)
030131 Operator’s Error Cannot start by external start protection. (F2)
030132 Operator’s Error Cannot start by Machine is already in “running” mode.
030133 Operator’s Error Enable SW is busy status.
030134 Operator’s Error Cannot start by Machine is already in “running” unit.
030135 Operator’s Error Cannot start by Machine is not in “STOP” mode.
030136 Operator’s Error Cannot start by Machine is not in “STOP” or ”PAUSE” mode.
030137 Operator’s Error Remove the P.C.B. at inside the L1 cnvr.
030138 Operator’s Error Remove the P.C.B. at outside the L1 cnvr.
030139 Operator’s Error Remove the P.C.B. at inside the L2 cnvr.
03013a Operator’s Error Remove the P.C.B. at outside the L2 cnvr.
03013b Operator’s Error Remove the P.C.B. at inside the R1 cnvr.
03013c Operator’s Error Remove the P.C.B. at outside the R1 cnvr.
03013d Operator’s Error Remove the P.C.B. at inside the R2 cnvr.
03013e Operator’s Error Remove the P.C.B. at outside the R2 cnvr.
03013f Operator’s Error
030201 Out Of Specified Rotate the rotary turret to designated angle.
Rotary Turret Angle
030301 Head Bypass Cancel bypass operation of selected head or do not use the head.
030302 Head Bypass The specified head is bypassed.
01 10-003 2-5 AFO01ETRP
1.2 “CHECK” Windows
Check Code Display Section A Display Section B
030303 Head Bypass The specified nozzle is bypassed.
030401 Operation Please input barcode data by manual input screen.
Requirement
030402 Operation Please check the operation in “pass” mode.
Requirement
030403 Operation X/Y chute P.C.B. detection is one side mode.
Requirement
030404 Operation Please exit P.E.C. manual adjustment mode.
Requirement (Click right and left button)
030405 Operation Please wait for a while.
Requirement (Now Machine is initializing.)
050101 No Current Select the current program.
050201 Setup Check Set up X/Y chute width.
050202 Setup Check Set up L conveyor width.
050203 Setup Check Set up R conveyor width.
050204 Setup Check Set up conveyor width.
050205 Setup Check Move the X/Y chute up.
050206 Setup Check Set up PCB support pins up/down.
050207 Setup Check Set up PCB locate lever.
050301 Recognition Data Please check recognition nozzle data and carry out data trans again.
Missing
050302 Recognition Data Please check comp recog lighting data and carry out data trans
Missing again.
050303 Recognition Data Please check recog camera mag data and carry out data trans
Missing again.
050304 Recognition Data Please check recog camera offset data and carry out data trans
Missing again.
050305 Recognition Data Please check recog camera gain level data and carry out data trans
Missing again.
050306 Recognition Data Please check recog nozzle gain level data and carry out data trans
Missing again.
050307 Recognition Data Please check comp recog data and carry out data trans again.
Missing
050308 Recognition Data Please check recog execution mode data and carry out data trans
Missing again.
070101 Front Safety Door Close the safety door and zero all device with the [ZERO] button.
070201 Rotary Wheel Pull on the rotary wheel handle.
070301 Front Area Sensor Remove foreign substance.
070401 Unavailable Data Input available feeder No. in current program.
070402 Unavailable Data Input available placement step in current program.
090101 Disengaged PCB Set P.C.B. on the X/Y table.
090201 Chute Lower Limit Move the X/Y chute down.
090301 Feeder Carriage Separate both feeder carriages and zero all devices with the [ZERO]
Collision button.
01 10-003 2-6 AFO01ETRP
1.2 “CHECK” Windows
Check Code Display Section A Display Section B
090401 Cam Phase Check the cam positioner.
090402 Cam Phase Re-adjust or repair the cam shaft if necessary.
090501 Out Of Limit Zero all device with the [ZERO] button.
090601 Linear Measure Alarm Press the [POWER OFF] button once and press the [POWER
ON] button.
090701 Out Of Feeder Axis Zero all device in manual mode or with the [ZERO] button.
Stationary Position
090702 Out Of Feeder Axis Check the feeder.
Stationary Position
090703 Out Of Feeder Axis Check feeder motor 1 & 2.
Stationary Position
090704 Out Of Feeder Axis Please check area around feeder carriage located at its home
Stationary Position position #1.
090705 Out Of Feeder Axis Please check area around feeder carriage located at its home
Stationary Position position #2.
090801 Rotary Turret Origin Adjust rotary turret angle to 0° or 360°.
090901 Furnace Signal Check the furnace signal.
090a01 Oil Cooler Alarm Check the cooling oil.
090b01 Cooling FAN Alarm Check the cooling FAN.
091001 Recognition Ready Wait until recognition unit is ready to work.
0b0101 Feeder Carriage Not Press the [F1 READY] button to set feeder carriage #1 in ready
Ready Switch mode.
0b0102 Feeder Carriage Not Press the [F2A READY] button to set feeder carriage #2 in ready
Ready Switch mode.
0b0103 Feeder Carriage Not Press the [F3B READY] button to set feeder carriage #3 in ready
Ready Switch mode.
0b0104 Feeder Carriage Not Press the [F2B READY] button to set feeder carriage #2 in ready
Ready Switch mode.
0b0105 Feeder Carriage Not Press the [F3A READY] button to set feeder carriage #3 in ready
Ready Switch mode.
0b0106 Feeder Carriage Not Press the [F4 READY] button to set feeder carriage #4 in ready
Ready Switch mode.
0b0111 Feeder Carriage Not Press the [F1 READY] button to set feeder carriage #1 in ready
Ready Switch mode.
0b0116 Feeder Carriage Not Press the [F2 READY] button to set feeder carriage #2 in ready
Ready Switch mode.
0b0121 Feeder Carriage Not Press the [F12 READY] button to set feeder carriage #12 in ready
Ready Switch mode.
0b0126 Feeder Carriage Not Press the [F34 READY] button to set feeder carriage #34 in ready
Ready Switch mode.
0b0131 Feeder Carriage Not Press the [F1A READY] button to set feeder carriage #1 in ready
Ready Switch mode.
01 10-003 2-7 AFO01ETRP
1.2 “CHECK” Windows