00193364-04 - 第24页

2 Assembly instructions Splice Detection Table Cont roller SIPLACE HS-50 Splice Detection Table Controller 09/2008 Edition 24

100%1 / 26
Splice Detection Table Controller 2 Assembly instructions Splice Detection Table Controller SIPLACE HS-50
09/2008 Edition
23
: Fix the cable for the table controller like shown below (upper picture).
2
The cable for the table controller splice detection must be fixed in a way that it doesn’t hook under
the plate edge (by lifting the table it could be too short and break at the table controller). 2
2
2
: Put the changeover table back into the machine.
: Connect the splice detection cable to the machine.
Cable tie
Here the cable to the table
controller can get stuck at
the fixation of the hose and
the connection can break at
the RJ45 connector by lifting
the table.
Possibility to thread
2 Assembly instructions Splice Detection Table Controller SIPLACE HS-50 Splice Detection Table Controller
09/2008 Edition
24