Techcon2019_MSTR_f - 第24页

22 www.techcon.com www.techcon.com www.techcon.com TS 1212/1201 Pinc h T u be V al ve s TS 1212/1201 Pin ch T u be V a l v es TS1201 Dispense Pen The TS1201 Dispensing Pen uses a disposable moulded tube assembly . Desig…

100%1 / 40
www.techconsystems.com
21
TS941/TS5322
High Pressure/Mini Spool Valves
TS941
High Pressure Spool Valve
The Spool Valves provide precise shot accuracy along with
“high volume” capacity over a range of material viscosities,
shot sizes and pressures. They feature “suck back” anti-drip
as well as a fast on/off dispensing function that is not affected
by material input pressure. An optional oil chamber creates
an additional liquid seal to prevent moisture from being car-
ried on the spool, excellent for moisture sensitive materials.
Pneumatically activated, the valves can be used with an inter-
nal spring close (single acting) or an air-closing connection
(double acting).
Output is a 1/4" NPT which allows multiple tip types to be used.
TS5322
Mini Spool Valve
The Mini Spool Valve Series is designed for better accuracy
with lower pressure. The series operates similar to the TS941,
however, it is smaller in size.
Typical Applications
Suitable for moisture sensitive adhesive when
utilizing supplied oiler. The Spool Valves can
be used in a wide range of applications such as
flux paste, grease, RTV Silicone, UV cure gel,
solder mask, gasketing.
TS941 - Gasketing
TS5322 - Gasketing
Valve Specifications
Part Number TS941 TS5322
Length 4.7" (119mm) 4.00" (101.6mm)
Diameter 1.5" (38mm) 1" (25mm)
Weight 1.61 lb. (726 g) 0.31 lb. (141 g)
Wetted Parts 303 Stainless Steel,
UHMWPE, EPR
303 Stainless Steel,
Anodized Al,
Teon
®
,EPR
Viscosity Range 5 - 3000k cps 5 - 1000k cps
Max Fluid Pressure 2500 psi (172.4 bar) 500 psi (34.5 bar)
Activation Pressure 70 psi (4.8 bar) 70 psi (4.8 bar)
Material Inlet 3/8" NPT 1/8" NPT
Material Outlet 1/4" NPT 1/8" NPT
Mounting 1.50" Diameter 1/4"-20UNC-2B
TS5322
Mini Spool Valve
TS941
Spool Valve
22
www.techcon.com
www.techcon.com www.techcon.com
TS1212/1201
Pinch Tube Valves
TS1212/1201
Pinch Tube Valves
TS1201 Dispense Pen
The TS1201 Dispensing Pen uses a disposable moulded tube
assembly. Designedto handle awide varietyof uids– from
adhesives and lubricants to sealants and masks. Gravity or
pressure fed, the pen has a built-in shot and flow rate for re-
peatability. Includes pre-assembled applicator pen, two clear
and two black spare pinch tube assemblies, an assortment of
disposable dispensing tips and a 24” (0.61m) hose. Replace-
ment pinch tube assemblies sold in packs of 10.
TS1212 Pneumatic Pinch Tube Valve
Provides control for continuous or micro shot applications of
low to semi-viscous fluids. The “ON/OFF” control is achieved
by automatically opening and closing (pinching) a moulded
polyethylene tube assembly. Adjusting the opening size of the
pinch tube assembly determines the shot size or flow rate. In
addition, the air actuated valve can be timed to develop de-
sired shot sizes. Finally, a wide range of dispensing tips can
be used to further refine the amount of dispensed output. The
only part of the valve making contact with the fluid being dis-
pensed is the disposable pinch tube assembly. Replacement
pinch tube assemblies are sold in packages of 10.
Key Features
• Disposableuidpath
• Simpletooperate
• Compactsizeandweight
Typical Applications
Cyanoacrylates, anaerobics, two-part
adhesive, etc.
TS1201 - Dispense pen
TS1212 - Pneumatic Pinch Tube Valve
Spare Pinch Tube for TS1201 (Sold in packs of 10)
Part Number Material I.D. Connection
1201-000-004BPK Black PE 0.1" (2.54mm)
Male to Female
1201-000-004PK Natural PE 0.1" (2.54mm)
Male to Female
1201-000-006PK Natural PE 0.07" (1.78mm)
Male to Female
1201-006-000PK Natural PU 0.125" (3.18mm)
Male to Female
Spare Pinch Tube for TS1212 (Sold in packs of 10)
Part Number Material I.D. Connection
1212-004-002BPK Black PE 0.1" (2.54mm)
Male to Female
1212-004-002PK Natural PE 0.1" (2.54mm)
Male to Female
1212-004-000PK Natural PE 0.07" (1.78mm)
Male to Female
1212-004-100BPK Black PU 0.125" (3.18mm)
Male to Female
1212-004-100PK Natural PU 0.125" (3.18mm)
Male to Female
Specifications
Part Number TS1201 TS1212
Length 5" (127mm) 2.49" (63mm)
Diameter 1.34" (34mm) 1.58" (40mm)
Weight 0.08 lb. (36 g) 0.18 lb. (82 g)
Wetted Part: Polyethylene (standard),
Polyurethane (optional)
Viscosity Range 1-45k cps
Max Fluid Pressure 60 psi (4.1 bar)
Material Inlet Female Luer Lock
Material Outlet Male Luer Lock
Mounting 1/4”-20UNC-2B
Activation Pressure 50 psi (3.4 bar)
minimum
www.techcon.com
www.techcon.com www.techcon.com
23
TS5500
Spray Valves
TS5500 Series
Spray Valves
The Spray Valves are designed for precise spray applications of
low viscosity materials. Total control of the spray cycle is provided
by adjustable fluid flow and precise control of pre-spray, atomizing
air and post-spray with the TS560R Valve Controller. Normal main-
tenance is simple and downtime is virtually eliminated with only
one seal to replace.
The TS5540 Spray Valves come with FDA-Compliant 303 stainless
steel construction in both air cylinder and fluid housing. A field re-
placeable Delrin® seat provides positive shut-off and extends life
cycles. The compact design and easy-mount threaded hole allow
for easy integration into automated applications.
Key Features
• Consistentspraycoveragewithnooverspray
• Positiveshut-off
• Adjustableowcontrol
• Longlifecycles
TS5540
Spray Valve
with Cone Nozzle
TS5540
Spray Valve
with Fan Nozzle
TS5520
Spray Valve
with Cone Nozzle
Cone Nozzle
Fan Nozzle
TS5540-MS
Microshot
Spray Valve
Valve Specifications
TS5520 TS5540
Length 4.2" (107mm) 4.2" (107mm)
Diameter 1.12" (28mm) 1.12" (28mm)
Weight 0.3 lb. (136 g) 0.74 lb. (336 g)
Wetted Parts 303 SS, Teon
®
, EPR,
Anodized Al, Delrin
®
303 SS, Teon
®
,
Delrin
®
Viscosity Range 1-1k cps 1-5k cps
Max Fluid Pressure 100 psi (6.9 bar)
Activation Pressure 70 psi (4.8 bar) Minimum
Connections Inlet: 1/8" NPT Outlet: Spray nozzle
Mounting 1/4" 20UNC-2B
Valves with Nozzles
Opening Diameter Cone Nozzle Fan Nozzle
TS5520 0.046" (1.17mm) Standard Not available
TS5540 0.014" (0.356mm) TS5540-014R TS5540-014F
0.028" (0.711mm) TS5540-028R TS5540-028F
0.046" (1.17mm) TS5540-046R TS5540-046F
Nozzles Only
Opening Diameter Cone Nozzle Fan Nozzle
0.014" (0.356mm) RNC014 FNC014
0.028" (0.711mm) RNC028 FNC028
0.046" (1.17mm) RNC046 FNC046
Typical Applications
To spray fine mist of low viscosity fluids
such as: conformal coating, solvent, oil, etc.
TS5540-MS Microshot Spray Valve
The TS5540-MS spray valve is designed
to spray low viscosity materials through
disposable dispensing tips. Spray
patterns range from 0.18" - 0.60"
(4.6mm-15mm) in diameter.
TS5540-MS - Spraying conformal coating