Techcon2019_MSTR_f - 第5页
www.techcon.com www.techcon.com www.techcon.com 3 www.techcon.com TS250/TS35 0 Digit al Dispe nse r / Contr ol ler TS250 Se ri es Di git a l Disp en se r / Co n tro ll e r The TS250 Series Dispenser /Contr oller dispense…
2
www.techcon.com
www.techcon.com www.techcon.com
www.techcon.com
Application Table of Contents
Find the right products for your applications
Bonding With Cyanoacrylate Adhesives (CA)
CA is a very frequently used adhesive in generic bonding applications and it is best used with a moisture
resistant dispensing system. The TS5622VU Diaphragm valve along with the TS550R controller and TS1258
pressure pot is a perfect system for this application. TS5622VU (page 18), TS550R (page 25), TS1258
(page 26)
Domed Logo Badges Application (Doming)
Consumer and business products often display the manufacturer’s name on a sticker that is encapsulated
underneath a dome of uid. This is called “Doming” and is commonly used as this adds a better “look and
feel” to the product. The TS5622VU-DVD with the TS550R controller and TS1258 pressure pot is a perfect
system for this application. TS5622VU-DVD (page 18), TS550R (page 25), TS1258 pressure pot (page 26)
Microdot Adhesive Dispensing
Most medical device manufacturing applications require a dispensing system that can provide a highly
repeatable dispensing of UV adhesives. With the unique needle shut off design inside the dispensing tip,
the TS5440 Microshot needle valve is the perfect choice for these applications. The TS550R controller is
recommended for this valve. TS5440 Microshot needle valve (page 20), TS550R controller (page 25)
Spray Conformal Coating Application
The TS5540 Series spray valve along with the TS560R controller and the TS1258 pressure pot is an ideal
system to spray conformal coating material on the surface of an assembled printed circuit board to provide
protection against moisture, dust and corrosion from extreme environments. TS5540 Series spray valve
(page 23), TS560R controller (page 25), TS1258 pressure pot (page 26)
Gasketing Application
When a high throughput or large shot size is required for gasketing or similar “Form-in-place-gasket”
applications, the TS941 Series spool valve along with the TS550R controller is the recommended system
choice. Whether the uid is fed from a cartridge or pail pump, the TS941 Series will dispense accurately and
consistently through a dispensing nozzle or dispensing tip.
For ner deposit control of sealing material, the TS5322 Series mini spool valve with the TS550R control-
ler is recommended. TS941 Series spool valve (page 21), TS550R controller (page 25), TS5322 Series mini
spool valve (page 21)
Dam Writing Application
The TS7000 Series rotary valve along with the TS570R controller is an ideal dispensing system to dispense
the “Dam” around the die of an integrated circuit (i.c.) as an alternative method to using the pre-form mold-
ed design. TS7000DCX Series rotary valve (page 17), TS570R controller (page 25)
Plural Component Material Dispensing
Plural component material dispensing is no longer a problem when using a Disposable Material Path valve.
When the 2-component material starts to cure, just throw away the valve wetted parts. It takes less than 1
minute to replace with new parts.
For low viscosity material, the TS1212 pinch tube valve along with the TS550R controller is recommended.
For medium to high viscosity material with high repeatability rate requirement, the TS5000DMP valve
with the TS570R controller is suitable. TS1212 pinch tube valve (page 22), TS550R controller (page 25),
TS5000DMP-DCX valve (page 16), TS570R controller (page 25)
Solder Paste Dispensing
Solder paste is the most difcult material to dispense. The TS5000DMP-DCX Series rotary valve is de-
signed specically to dispense solder paste without clogging and separation. Dot size as small as 0.010”
(0.254mm) can be dispensed consistently. A majority of automated dispensing systems incorporate the
TS5000DMP-DCX Series valve for solder paste dispensing. TS5000DMP-DCX Series rotary valve (page
16), TS570R Controller (page 25)
www.techcon.com
www.techcon.com www.techcon.com
3
www.techcon.com
TS250/TS350
Digital Dispenser/Controller
TS250 Series
Digital Dispenser/Controller
The TS250 Series Dispenser/Controller dispenses low, medium
and high-viscosity fluids accurately and consistently. These
systems are economical, highly accurate and repeatable mi-
cro-air dispensing systems. These user friendly fluid dispensing
systems include digital timer with rotary control time knob for
easy setup and a vacuum control for all viscosities of fluids.
Packaged ready to use with a universal power supply, foot
switch, air hose, sample tips, syringe barrel and adapter. Fea-
tures a small footprint and is lightweight.
Available in two versions of operating pressure: 0 to 100 psi
(0-6.9 bar) for general applications and 0 to 15 psi (0-1.0 bar)
for specific low viscosity applications.
TS350 Series
Digital Dispenser/Controller
The TS350 Series Dispenser/Controller is equipped with digital
timer, pressure and vacuum read out on a large LCD. The firm-
ware provides the option of programming up to 10 varied, se-
quenced or individual shots. It is intuitive to use, dispenses low,
medium and high-viscosity fluids accurately and consistently.
The TS350/355 Series includes a vacuum-driven “suck-back”
to control material “tailing” and waste and to control drips of
fluid between dispense cycles. These systems have user pro-
grammable manual (purge) and automatic dispense cycle set-
tings (program and time) and they feature a “Teach Mode” for
determining the dispensing time required when dispensing
output is unknown.
Packaged ready to use with a universal power supply, foot
switch, air hose, sample tips, syringe barrel and adapter. Fea-
tures a small footprint and is lightweight.
Available in two versions of operating pressure: 0 to 100 psi
(0-6.9 bar) for general applications and 0 to 15 psi (0-1.0 bar)
for specific low viscosity applications.
Specifications
Part Number TS250 Series TS350 Series
TS250/TS350 Dispenser/Controller 0-100 psi (0-6.9 bar)
TS255/TS355 Dispenser 0-15 psi (0-1.0 bar)
Specications & Dimensions
Cabinet Dimensions 6"W (152mm) x 6.5"L (152mm) x 7.0"H (178mm)
Weight 2.6 lb. (1.2 kg)
Cycle Rate 600 cycle/minute 1200 cycle/minute
Timing Range 0.020-60.000 seconds 0.008-60.000 seconds
Timing Repeat Tolerances +/- 0.001%
Input Voltage 100-240 VAC
Input Frequency 50-60 Hz
Cycle Mode TIMED, PURGE TIMED, INTERRUPT,
TEACH, PURGE
Meets or exceeds CE, TUV-GS and NRTL
Warranty 1 year
4
www.techcon.com
www.techcon.com www.techcon.com
700 Series
Dispensing Components
700 Series
Dispensing Components
Our 700 Series Premier dispensing components are silicone
and chloride free and designed to work with industry stan-
dard equipment. 700 Series dispensing components ensure
accuracy, repeatability and productivity.
700 Series Syringe Barrels
Unique ultra-low draft construction of inner diameter yields
high accuracy and stability. They are comprised of industry
compliant silicone and chloride free, low friction polypropyl-
ene. Available in three different colors: Natural for most ge-
neric applications, amber provides protection of UV/visible
light block (up to 520nm), but with the ability to see material
inside the barrel; and black for total light block. Sold in bulk
and packs of 50.
Size Natural Amber Black
3 cc 7030LL1N-1000 7030LL1D-1000 7030LL1B-1000
5 cc 7050LL1N-1000 7050LL1D-1000 7050LL1B-1000
10 cc 7100LL1N-1000 7100LL1D-1000 7100LL1B-1000
30 cc 7300LL1N-500 7300LL1D-500 7300LL1B-500
55 cc 7550LL1N-250 7550LL1D-250 7550LL1B-250
Size Wiper Piston
(White)
Straight Wall
Piston (Red)
Easy Flow
Piston (Blue)
3 cc
7030009W-1000 7030006R-1000 7030007BL-1000
5 cc
7050009W-1000 7050006R-1000 7050007BL-1000
10 cc
7100009W-1000 7100006R-1000 7100007BL-1000
30-55 cc
7300009W-1000 7300006R-1000 7300007BL-1000
700 Series Syringe Barrel Kits
For your convenience these syringe barrels and white wiper pis-
tons are packaged together without pistons inserted. Kits with
blue pistons are also available. Sold in bulk and packs of 50.
700 Series Air Powered Pistons
Spread the pressure evenly across, using a piston for consistent
dispensing of even high viscosity material. Easy Flow pistons
(blue) require less pressure to dispense and prevent air from
becoming entrapped during the dispense process. Tight fit
Wiper pistons (white) provide a complete seal for low viscos-
ity fluid. Loose fit straight wall pistons (red) prevent stringing
and bouncing when dispensing high viscosity material. Sold in
bulk and packs of 50. Made from polyethylene.
Syringe Barrel Kits With White Wiper Pistons
Size Natural Amber Black
3 cc 7030LL1NW-1000 7030LL1DW-1000 7030LL1BW-1000
5 cc 7050LL1NW-1000 7050LL1DW-1000 7050LL1BW-1000
10 cc 7100LL1NW-1000 7100LL1DW-1000 7100LL1BW-1000
30 cc 7300LL1NW-500 7300LL1DW-500 7300LL1BW-500
55 cc 7550LL1NW-250 7550LL1DW-250 7550LL1BW-250
Syringe Barrel Kits With Blue Wiper Pistons
Size Natural
3 cc 7030LL1NBL-1000
5 cc 7050LL1NBL-1000
10 cc 7100LL1NBL-1000
30 cc 7300LL1NBL-500
55 cc 7550LL1NBL-250
700 Series Syringe Barrel Dimensions
Capacity Overall Length A
inches/mm
Outside Diameter B
inches/mm
3 cc 2.96/75.18 0.46/11.56
5 cc 2.83/71.9 0.59/14.99
10 cc 3.58/90.9 0.72/18.29
30 cc 4.66/118.36 0.99/25.15
55 cc 6.91/175.51 1.01/25.65