YS24X_Ope_E - 第127页

2-52 2  asic operation 7 Set the “Pitch Index” and “Feed Timer Offset” parameters. • T ape components: Double-click the "Pitch Index" parameter field an d select a correct feed pitch from the drop-d own list. …

100%1 / 165
2-51
2
asic operation
n
Tape components and stick components
6
Set the "Tape Type" and "Feeder Type" parameters.
• Tapecomponents:
Double-click the "Tape Type" parameter field and select a desired tape type from the drop-down list.
The "Feeder Type" parameter setting is not needed.
• Stick components:
Double-click the "Feeder Type" parameter field and select “Wide multi-stick” from the drop-down list.
The "Tape Type" parameter setting is not needed
[Parts]-[Basic] screen
"Tape Type" parameter
"R Tape Type"
24227-L4-00
The "Tape Type" parameter changes as the "Package" parameter is changed, so set it to the correct
setting.
2-52
2
asic operation
7
Set the “Pitch Index” and “Feed Timer Offset” parameters.
• Tape components:
Double-click the "Pitch Index" parameter field and select a correct feed pitch from the drop-down list.
The "Feed Timer Offset" parameter setting is not needed.
• Stick components:
Double-click the “Feed Timer Offset” parameter field and set a value ranging from “+4.0 sec.” to “-3.5 sec.”
from the drop-down list.
The "Pitch Index" parameter setting is not needed.
n
NOTE
Generally, the timer value of the machine setting has been set at “2 sec.”. So, if you set a value smaller than “-2.0
sec.”, the calculation value inside the machine becomes “0 sec.”. Therefore, this input value becomes invalid. At this
time, “Normal (0)” applies to the parameter setting.
n
NOTE
This parameter does not appear when "Reference of feeder pitch" is set to "Feeder setup".
[Parts]-[Basic] screen
"Pitch Index" parameter (Example of tape feeder)
"F Pitch Index"
24228-L4-00
TIP
For more details, refer to the User’s Manual for SS feeder.
2-53
2
asic operation
n
When using tray components
6
Set the "Feeder Type" parameter.
Select "Auto TC" from the drop-down list.
[Parts]-[Basic] screen
"Feeder Type" parameter
"Feeder Type"
24232-L4-00