YS24X_Ope_E - 第62页
1-25 1 Part names and functions 7. Blow station The blow station blows high-pressure air internally through the nozzles and shafts to blow away dust and grit and clean the nozzles. Sensor for detecting nozzles left on bl…
1-24
1
Part names and functions
n
Dual-lane
Plus direction
Minus direction
W2 axis
Axis configuration
Example of RL (Right-to-left flow) when viewed from the front of the machine
RA1 axis
RB1 axis
RA2 axis
RB2 axis
N Head axes
N Main axes
A table Head unit
B table Head unit
ZB1ZB10 ZB6 ZB5
ZA10ZA1 ZA5 ZA6
Fixed
conveyor rail
Lane 1
Lane 2
W1 axis
PU1 axis
PU2 axis
YB axis
YA axis
XA axis
XB axis
N Transfer axes
23133-L4-00
n
Function of each axis
Axis Function
XA, XB Moves the head assembly above the table in parallel with the board flow on the conveyor.
YA, YB Moves the head assembly perpendicular to the board flow on the conveyor.
RA1, RA2, RB1, RB2 Rotates the nozzle shaft of each head.
ZA1 to ZA10, ZB1 to ZB10 Moves the component pick-and-place head of each head vertically.
W1, W2 Changes the conveyor width.
PU1, PU2 Moves the push-up plate vertically.
1-25
1
Part names and functions
7. Blow station
The blow station blows high-pressure air internally through the nozzles and shafts to blow away dust and grit
and clean the nozzles.
Sensor for detecting
nozzles left on blow station
Multi-vision camera (standard)
Blow station
Blow station
23118-L4-00
1-26
1
Part names and functions
7.1 Performing a nozzle shaft blow
This section explains how to manually perform a nozzle shaft blow at any desired timing.
1
Open the [Unit] – [Head] tab screen.
2
Press the [Cleaning Blow] button.
A confirmation dialog box appears asking whether to perform nozzle shaft blow.
Press the [OK] button to perform nozzle shaft blow and proceed to the next step. If you want to cancel
nozzle shaft blow, press the [Cancel] button.
Nozzle shaft blow
24100-L4-00