SIPLACE D3 规格说明书英文版 - 第21页
21 Component Feeding Component Changeover Table Technical Data Length x width 752 x 592 mm² Height 830 mm for 830 mm PCB transport height 900 mm for 900 mm PCB transport height 930 mm for 930 mm PCB transport height 950 …
20
Component Feeding
Component Changeover Table
SIPLACE component
changeover tables are stand-
alone modules that are easy
to maneuver and can be
docked into the machine.
This ensures that the table is
accurately positioned in the
placement machine. Reels
are kept in the tape container
on the component change-
over table. A cutting device
on the machine automatically
cuts the used tape. Option-
ally, a matrix tray changer
may be installed at locations
2 and 4. The component
changeover tables can be
set up directly on the
machine or in an external
set-up area with feeder mod-
ules. The benefits of offline
set-up are that the set-ups
can be prepared without
stopping the line. This allows
the set-up to be changed
very quickly using the
changeover table principle.
The component feeders are
at rest during the placement
process, which means that
components can be refilled
and tapes may be spliced
without stopping the
machine. If an optional com-
ponent barcode reader and
the Setup center option are
installed, it is possible to read
and check the barcodes on
the tape reels. This makes
sure that the component is
allocated to the right track,
and the PCB placement can
be traced using traceability
software.
Dummy feeder modules are
used at unassigned locations
to protect the operators.
21
Component Feeding
Component Changeover Table
Technical Data
Length x width 752 x 592 mm²
Height 830 mm for 830 mm PCB transport height
900 mm for 900 mm PCB transport height
930 mm for 930 mm PCB transport height
950 mm for 950 mm PCB transport height
Weight
without feeder modules
with feeder module at all locations
88.9 kg
143.7 kg
Reel diameter
standard
maximum
up to 432 mm (17“)
483 mm (19“)
Locations for feeder modules max. 15 (3 x 8 mm S)
Changeover time < 1 minute
Component Feeding 4 component changeover tables with tape
reel holders and integral waste containers
15 slots, 30 mm wide per CO changeover
table
Matrix tray changer rather than a compo-
nent changeover table at locations 2 and 4
Feeder module types Component tapes, bulk cases, stick maga-
zines, Dip module, waffle-pack trays, OEM
feeder modules (surf tape, component dis-
posal module, waffle-pack trays, Jedec
trays, label feeder modules, inline program-
ming feeder modules)
Component feeder table
Centering
Communication unit
Waste container
for remaining empty tape
Tape container
22
Component Feeding
S Tape Feeder Modules
Packaging Feeder module Width Loca-
tions
Transport
distance
Max.
CO height
Paper and
blister tapes
2 x 8 mm S
a
3 x 8 mm S
a
3 x 8 mm S 0201
b
3 x 8 mm SL
c
1 x 12/16 mm S
30.6 mm
30.6 mm
30.6 mm
30.6 mm
30.3 mm
1
1
1
1
1
2/4 mm
2/4/8 mm
2/4 mm
2/4/8 mm
4/24 mm
d
2.5 mm
e
2.5 mm
0.7 mm
2.5 mm
14 mm
e
Blister tapes 1 x 24/32 mm S
1 x 24/32 mm SDP
f
1 x 44 mm S
1 x 44 mm SDP
f
1 x 56 mm S
1 x 56 mm SDP
f
1 x 72 mm S
1 x 88 mm S
42.4 mm
42.4 mm
54.6 mm
54.6 mm
66.6 mm
66.6 mm
82.6 mm
98.6 mm
1.5
1.5
2
2
2.5
2.5
3
3.5
4/40 mm
d
4/40 mm
d
4/52 mm
d
4/52 mm
d
4/68 mm
d
4/68 mm
d
4/80 mm
d
4/96 mm
d
14 mm
24 mm
14 mm
24 mm
14 mm
24 mm
14 mm
14 mm
Tape reels 178 - 483 mm diameter (7" - 19")
Cycle S feeder modules up to 20 mm transport distance < 150 ms
Changeover
time
15 s
a) Extra fiducials provided for feeder position recognition
b) For 0201 and 0402 in paper tapes
c) SL = Shutterless, from 0201 in paper or blister tapes
d) Variable in 4 mm increments
e) PSA Kit available as an option
f) DP = Deep Pocket