SIPLACE D3 规格说明书英文版 - 第24页

24 Component Feeding Dummy Feeder Modules The following dummy feeder modu le variants are available for component change over tables: SIPLACE dummy feeder module for 1 location SIPLACE dummy feeder module for 6 to 10 loc…

Component Feeding

Alternative SIPLACE Feeder Modules

Technical data

Bulk case feeder modules

Packaging form

Feeding rails

Location

Bulk case

Chip 0402 component height:

0.5 mm

Chip 0603 component height:

0.8 mm

Vibratory stick feeder,

type 3

Packaging form

Number of tracks and width

Location

Stick steel magazines

3 x  9.5 mm

2 x  15 mm

1 x  30 mm

Dip module Takes up 3 locations of a

3 x 8 mm S feeder module

a) Extra fiducials provided for feeder position recognition

Description

The SIPLACE bulk case

feeder module processes

bulk cases on two tracks. It

feeds rectangular and round,

passive components. The

PCB magazines (bulk cases)

are simply replaced for refill-

ing - without stopping the

machine.

The module essentially con-

sists of the basic element

plus two feeder rails and

PCB magazines to suit the

component type and height.

The components are sepa-

rated and fed along the rails

by compressed air.

The principle of the fixed

component table has proven

its worth, even when bulk

cases are used: the vibra-

tions that can occur with

other placement machine

concepts can have a highly

detrimental effect on the

component quality due to

abrasion, for example.

Even with stick magazines,

the stationary component

supply has significant advan-

tages: the universal vibratory

stick feeder can be topped up

during placement.

The DIP module is suitable

for dip-fluxing flip-chips,

CSPs (chip-scale/size pack-

ages) and for wetting flip-chip

bumps with isotropic, con-

ductive adhesive.

Bulk case feeder module

Vibratory stick feeder, type 3

Dip module

Component Feeding

Dummy Feeder Modules

The following dummy feeder module variants are available for

component changeover tables:

SIPLACE dummy feeder module for 1 location

SIPLACE dummy feeder module for 6 to 10 locations

SIPLACE dummy feeder module for 11 to 20 locations

Danger

To ensure that your

SIPLACE placement ma-

chine runs safely, a feeder

must be assigned to every lo-

cation on the component

changeover table. If you do

not have enough feeder

modules, then you should

use dummy feeder modules

as space holders.

Dummy feeder module for 1 location

Dummy feeder module for

6 - 10 locations

Dummy feeder module for

11 - 20 locations

Component Feeding

Waffle-Pack Tray Holder

Description

The waffle-pack tray holder

is a device for holding

JEDEC trays used to supply

components. The holder is

placed on the component

table like a feeder module

and the waffle-pack trays are

changed manually.

The tray holder set-up is rec-

ommended if there are just a

few component types to be

placed from a waffle-pack

tray.

Waffle-pack tray holder

Technical data

Holder for large waffle-pack tray

Dimensions LxWxH 425 x 264 x 113 mm³

Locations filled on the

component table

Possible positions Locations 2 and 4

Range of placement heads TH, C&P6, C&P12

Holder for small waffle-pack tray

Dimensions LxWxH 425 x 140 x 113 mm³

Locations filled on the compo-

nent table

Possible positions Locations 2 and 4

Range of placement heads TH, C&P6, C&P12

Max. waffle-pack tray height

including component

C&P12

C&P6

12.5 mm

28.5 mm