SIPLACE D3 规格说明书英文版 - 第43页
43 Technical Data Dimensions of the Placement System Placement System’s Center of Gravity
42
Technical Data
Dimensions and Set-Up Conditions
Length
with both extension kits
with one extension kit
with no extension kits
2380 mm
2103 mm
1826 mm
Width of the basic machine
with CO changeover table (locations 1 + 4)
with CO changeover table (locations 2 + 3)
including monitors
with keyboards
2815 mm
2395 mm
2766 mm
2804 mm
Height of the machine
with indicator lamp
with protective covers folded up
max. 1863 mm
1990 mm (PCB transport height 830 mm)
2060 mm (PCB transport height 900 mm)
2090 mm (PCB transport height 930 mm)
2112 mm (PCB transport height 950 mm)
Machine ground clearance 120 mm (PCB transport height 830 mm)
190 mm (PCB transport height 900 mm)
220 mm (PCB transport height 930 mm)
240 mm (PCB transport height 950 mm)
Weight
Machine with component changeover table
Full configuration with feeder modules
3790 kg
4171 kg
Footprint 6.70 m²
Load per unit area
a
a) The load per unit area calculation included an additional working space of 0.5 m on each side of the ma-
chine.
5.84 kN/m²
Number of machine feet 6
Maximum noise emissions 75 dB (A)
Room temperature between 15 °C and 35 °C
Atmospheric humidity 30 to 75 % (no higher than 45% on average
to prevent any possibility of condensation
on the machine)
43
Technical Data
Dimensions of the Placement System
Placement System’s Center of Gravity
44
Technical Data
Dimensions and Set-Up Conditions
Maneuvering Radii for CO Tables and MTC