Printer 600 Machine Programming - 第128页
0$&+,1( 352*5$00 ,1* 67$786 3$*( 1.128 User Manual Software Ve rsion 07SP04
0$&+,1(352*5$00,1*
67$7863$*(
1.126 User Manual Software Version 07SP04
Information
Windows
Three information windows are displayed on the status page as follows:
• Printer - Status (on Display Types 1 and 2)
• Process - Parameters (on Display Types 1 and 2)
• Rates (on Display Type 2 only)
Printer - Status The following table lists all the items that can be displayed in the Printer - Status
information panel:
The Printer - Status panel can display up to a maximum of 14 items, (on both
Display Types 1 and 2).
Item Description
Status The printers current status is displayed. Options are:
Maintenance; Operator Active; Ready; Machine Set Up.
Mode Displays the current mode of operation of the printer. Options are:
Step - The printer operates one step at a time;
Auto - The printer operates continuously;
Single - The printer prints a single board;
No Print - The printer passes the board through the printer without printing.
Batch Count Displays the amount of boards printed from the current batch. This is only
shown on Display Type 1.
Batch Limit Displays the total amount of boards to be printed in the current batch. This
is only shown on Display Type 1.
Operator Displays the name of the operator currently logged on to the printer.
Product Displays the current product loaded onto the printer.
Data Logging Displays whether data logging is selected. When selected, a pressure. dat
file is created as the squeegee carries out a print stroke. This option is
selected in Test Cycles in the Maint. menu.
Host Comms Displays the condition of host communications. Options are:
Disabled - Host Comms not selected;
Enabled-No Comm - Host Comms selected, but not connected;
Enabled-Comm - Host Comms selected and connected.
Temperature Displays the current temperature within the printhead area. This is only
displayed if a temperature and humidity sensor is fitted.
Humidity Displays the current relative humidity within the printhead area. This is only
displayed if a temperature and humidity sensor is fitted.
Cycle Time The first figure displays the cycle time of the last board to be printed. The
second figure displays the average cycle time of the batch. Cycle time is
the time taken for the board to pass from the input sensor to the output
sensor, not including delays, ie waiting for the downline machine.
Throughput The first figure displays the throughput time of the last board to be printed.
The second figure displays the amount of boards to be printed in an hour,
based on the throughput times of the batch. Throughput is the time taken
for the board to pass from the input sensor to the output sensor, including
all delays.
SW Version Displays the version of software currently loaded on the printer.
0$&+,1(352*5$00,1*
67$7863$*(
Software Version 07SP04 User Manual 1.127
Process -
Parameters
The following table lists all the items that can be displayed in the Process -
Parameters information panel:
The Process - Parameters panel can display up to a maximum of 14 items on
Display Type 1 and 6 items on Display Type 2.
The values of the Process - Parameters are set in the product file of the loaded
product.
Rates The following table lists all the items that can be displayed in the Rates
information panel:
The Rates panel can display up to a maximum of 6 items and is only shown on
Display Type 2.
Print Mode Front Print Speed Rear Print Speed Front Pressure
Rear Pressure ProFlow System Press. Print Gap Separation Speed
Paste Dispense Rate Clean Screen Rate 1,2 Forward X Offset Forward Y Offset
Forward θ Offset Reverse X Offset Reverse Y Offset Reverse θ Offset
Item Description
Batch Count/ Limit The first figure displays the amount of boards printed in the current batch. The second figure
displays the total amount of boards to be printed in the current batch. The batch count limit is
set in Batch Limit in the Monitor menu.
Board Count/Limit The first figure displays the amount of boards printed in the current board count. The second
figure displays the total amount of boards to be printed in the current board count. The board
count limit is set in Board Count in the Edit Data menu. The board count limit allows a separate
board count to be set within the total batch count.
Paste Disp. Cnt/Rate The first figure displays the amount of boards printed since the last paste dispense. The second
figure displays the amount of boards to be printed between each paste dispense. The paste
dispense count/rate is set in Paste Dispense Rate in the Edit Data menu.
Clean 1 Count/Rate The first figure displays the amount of boards printed since the last screen clean mode 1 was
carried out. The second figure displays the amount of boards to be printed between each screen
clean mode 1. The clean 1 count/rate is set in Screen Clean Rate 1 in the Edit Data menu.
This parameter is only displayed while a blue or silver under screen cleaner is fitted.
Clean 2 Count/Rate The first figure displays the amount of boards printed since the last screen clean mode 2 was
carried out. The second figure displays the amount of boards to be printed between each screen
clean mode 2. The clean 2 count/rate is set in Screen Clean Rate 2 in the Edit Data menu.
This parameter is only displayed while a blue or silver under screen cleaner is fitted.
Vortex Stroke/Limit The first figure displays the amount of cleaning strokes carried out since the Vortex cleaning
cassette was replaced. The second figure displays the total amount of cleaning strokes to be
carried out before the cleaning cassette needs replacing. The Vortex stroke/limit is set in Vortex
Cassette Life in the Edit Data menu. This parameter is only displayed while a Vortex under
screen cleaner is fitted.
Clean Count/Rate The first figure displays the amount of boards printed since the last Vortex screen clean was
carried out. The second figure displays the amount of boards to be printed between each Vortex
screen clean. The clean count/rate is set in Vortex Clean Rate in the Edit Data menu. This
parameter is only displayed while a Vortex under screen cleaner is fitted.
Print Direction Displays the print direction for the next board to be printed.
0$&+,1(352*5$00,1*
67$7863$*(
1.128 User Manual Software Version 07SP04