00195044-10_UM_VisionTeachStation_DE EN - 第122页

5 Installing the cameras Vision Teach Station User Manual 5.1 Installing stationary cameras, type 25, 33 and 36 12/2012 Edition 122 5.1.2.3 Fixing camera types 33, 36 and 25 to the pillar  Use the two special screws to …

Vision Teach Station User Manual 5 Installing the cameras

12/2012 Edition 5.1 Installing stationary cameras, type 25, 33 and 36

121

5.1.2 Installing the camera on the base module

5.1.2.1 Tools required

Allen key, set

5.1.2.2 Fitting the mount for camera types 33, 36 and 25

 Turn the camera 180° about its long axis so that the base plate (item 5) is pointing up.

 Place the mount (item 2) on the camera so that the parallel pin (item 3) slides into the hole (item

6) in the illumination head (item 1).

 Fix the mount (item 2) to the base plate (item 5) using the two hexagon socket head screws

M6 x 16 (item 4).

The illumination head can no longer become detached from the base module.

Fig. 5.1 - 6 Fitting the mount for camera type 33

(1) Illumination head

(2) Mount for type 33/36, item no. 03039467-xx; mount for type 25, item no. 03039471-xx

(3) Parallel pin

(4) Hexagon socket head screw M6 x 12, 2x

(5) Base plate

(6) Hole for parallel pin

5 Installing the cameras Vision Teach Station User Manual

5.1 Installing stationary cameras, type 25, 33 and 36 12/2012 Edition

122

5.1.2.3 Fixing camera types 33, 36 and 25 to the pillar

 Use the two special screws to fix the camera (item 1 in Fig. 5.1 - 7, page 123) in the cut-outs

in the mounting plate (item 3 in Fig. 5.1 - 7, page 123).

 Fix the mount (item 2 in Fig. 5.1 - 7, page 123) to the mounting plate (item 3 in Fig. 5.1 - 7,

page 123) using the 4 hexagon socket head screws M6 x 20 (item 5 in Fig. 5.1 - 7, page 123).

WARNING 5

Make sure that the camera is attached firmly to the mounting plate (item 3 in Fig. 5.1 - 7, page

123). For safety reasons, it must be screwed to the mounting plate with the 4 hexagon socket

head screws M6 x 20.

 Release the lock on the positioning unit (item 13 in Fig. 5.1 - 7, page 123 by turning the knob

(item 12 in Fig. 5.1 - 7, page 123) on the magnetic switch towards the pillar.

 Push the positioning unit (item 13 in Fig. 5.1 - 7, page 123) out of the camera range.

 Fix the component support (item 9 in Fig. 5.1 - 7, page 123) using the two hexagon socket head

screws M3 x 8 (item 8 in Fig. 5.1 - 7, page 123) to the holder (item 10 in Fig. 5.1 - 7, page 123).

 After fitting the component support, lock the positioning unit once more.

Vision Teach Station User Manual 5 Installing the cameras

12/2012 Edition 5.1 Installing stationary cameras, type 25, 33 and 36

123

Fig. 5.1 - 7 Fixing camera type 33 to the pillar