00195044-10_UM_VisionTeachStation_DE EN - 第149页

Vision Teach Station User Manual 7 Software 12/2012 Edition 7.3 Installing for the first time 149 Troubleshooting: 7  Open the Device Manager.  Search for a deactivated device under "Display adapters".  Acti…

7 Software Vision Teach Station User Manual

7.3 Installing for the first time 12/2012 Edition

148

When the installation is completed, the computer restarts. 7

 After restarting, log on as Administrator once more.

 Wait until the installation scripts have run.

 In the Device Manager, check that the drivers for the "Baumer PCI-A14" camera interface card

and the "C167D00N" CAN card were found (see Fig. 7.3 - 5, page 148).

If one of the drivers was not detected, follow the instructions in section 8.3.5, page 158 or

8.3.6, page 160. 7

Fig. 7.3 - 5Entries for the camera interface card and CAN card in Device Manager

(the question mark beside the CAN card is correct)

 Log on as the user plr using password: plr.

Wait until the installation scripts have run.

 Log back on as Administrator:

Then follow the steps described in section 7.2.4, page 143.

7.3.2 Installing with "Recovery Media - Celsius W380", item no. 03085500-xx

From the beginning of 2011 the Celsius W380 computer is delivered with recovery DVDs. Three

DVDs are enclosed with the package (WinXP 32bit, Win7 32bit and Win7 64bit). The VTS 4.3.1

version only supports WinXP 32bit and Win7 32bit. 7

 Start the recovery DVD and follow the instructions on the screen.

 Create an account with administrator privileges.

 Configure the network parameters as described in Table 7.3 - 4, page 147.

The drivers for the hot link and CAN cards will be installed together with the VTS software. 7

Known problem: 7

The recovery installation does not always install the graphic driver. You will recognize this error, if

you try to move windows on the screen (slow performance). 7

Vision Teach Station User Manual 7 Software

12/2012 Edition 7.3 Installing for the first time

149

Troubleshooting: 7

 Open the Device Manager.

 Search for a deactivated device under "Display adapters".

 Activate the adapter.

 Select "no Internet access" and then "Automatical installation".

 Restart the computer after the installation has been completed.

7.3.3 Installing with "Recovery Media" as of Celsius W510 computer

As of April 2012 the VTS is delivered with the Celsius W510 computer. The Recovery Media for

Windows 7, 32-bit and 64-bit are delivered ex works for this computer .

Celsius W510 is equipped with the new PowerCAN-PCI-II CAN card that supports the 32-bit and

64-bit operating systems.

The VTS software supports Windows 7, 32-bit and 64-bit as of the 5.0.1 version.

 Start the Recovery DVD and follow the instructions on the screen.

 Create a user account with administrator authorization.

 Configure the network parameters as described in Tab. 7.3 - 4, page 147.

The drivers for the Hotlink and CAN cards get installed together with the VTS software.

7 Software Vision Teach Station User Manual

7.4 Licensing 12/2012 Edition

150

7.4 Licensing

As of the 5.0.2 version, the SIPLACE Vision Teach Station is available as a pure licensed software

product. 7

A "Vision Teach Station" license is required in the SIPLACE License Manager for operation. The

SIPLACE License Manager has to run on the same computer as the SIPLACE Vision Teach

Station software. 7

Fig. 7.4 - 6 License entry for the SIPLACE Vision Teach Station in the SIPLACE License Manager

The SIPLACE Vision Teach Station can be ordered as a licensed software product with the

following data:

Tab. 7.4 - 5 Vision Teach Station with software license

Software

Vision Teach Station

with software license

Software package required

V5.0.2

SIPLACE Vision Teach Suite V5.x, item no. 00119789-xx