00195044-10_UM_VisionTeachStation_DE EN - 第99页

Vision Teach Station User Manual 1 Overview 12/2012 Edition 1.3 Which component cameras are supported? 99 1.3 Which component cameras are supported? The vision teach station supports the following component cameras: 1 Ta…

1 Overview Vision Teach Station User Manual

1.1 Description 12/2012 Edition

The vision teach station essentially consists of the following components:

– Base module with electronic circuits and component camera (see Fig. 1.0 - 1, page 97)

– Mini-tower PC

WINDOWS XP operating system 1

SIPLACE vision image processing software 1

SIPLACE Pro database server 1

Camera interfaces: CAN bus card and camera bus card 1

The possible configurations are described in chapter 3.

1.1 Description

The vision teach station is used to create and test descriptions for package forms for any place-

ment machine and to run component inspections.

The package form descriptions thus created may be stored in the SIPLACE Pro database on the

vision teach station and transferred to the SIPLACE Pro database of the production system. You

also have the option of loading vision measurement contexts from placement machines to the vi-

sion teach station, where they can be analyzed. Only multiple component measurements are not

yet possible on the placement machine.

1.2 Advantages

The major advantage of this offline system is that it is totally independent of the production system,

and no production system resources have to be used for creating and testing package form

descriptions. As a result, there is no loss of productivity due to the description and testing of

package forms. The time taken to introduce new products can also be considerably reduced with

this independent system.

Vision Teach Station User Manual 1 Overview

12/2012 Edition 1.3 Which component cameras are supported?

1.3 Which component cameras are supported?

The vision teach station supports the following component cameras:

Tab. 1.3 - 1 Component cameras supported by the vision teach station

Component camera Component range Used on which placement machine?

C&P, type 23, 6x6 ,

digital

01005 to 6 x 6 mm²

X series:

Head camera for the C&P20 head

C&P, type 28, 18 x 18,

digital

0402 to 18 x 18 mm²,

PLCC 44 including BGA, μBGA,

flip-chip, TSOP, QFP,

SO to SO32, DRAM

X/D series:

Head camera for the C&P12 head

C&P, type 29, 27 x 27,

digital

0201 to 27 x 27 mm²

PLCC, SO, QFP, TSDP, SOT,

MELF, CHIP, IC, BGA

X/D series:

Head camera for the C&P6 and C&P12

heads

C&P, type 30, 27 x 27,

digital

01005 to 27 x 27 mm²

PLCC, SO, QFP, TSDP, SOT,

MELF, CHIP, IC, BGA

X/SX/D series:

Head camera for the CPP and C&P12

headsf

P&P, stationary, type 33,

55 x 45, digital

0402 to 55 x 45 mm²,

MELF, SO, PLCC, QFP,

electrolytic capacitors, BGA,

connectors

X/D series:

Stationary camera for ICs and connec-

tors

P&P, stationary, type 25,

16 x 16, digital

0201 to 16 x 16 mm²,

SO, PLCC, QFP, sockets, plugs,

BGA, special components, bare

dies, flip-chips, shields

X/D series:

Stationary camera for flip-chip compo-

nents

P&P, stationary, type 36,

32 x 32, digital

(Is supported from SIPLACE

Pro 4.1 onwards)

0603 to 32 x 32 mm²

SO, PLCC, QFP, BGA, special

components, bare die, flip-chip

D1:

Stationary camera for ICs

2 Safety instructions Vision Teach Station User Manual

1.3 Which component cameras are supported? 12/2012 Edition

100

2 Safety instructions

WARNING 2

The safety instructions from the “Operational safety” chapter of the user manual and the service

manual take precedence over these instructions.

The vision teach station is supplied with main power voltage. Consequently parts of these systems

carry dangerous voltages! Incorrect use of the system or contact with voltage-carrying parts can

lead to death or severe injury.

– Always follow the applicable accident prevention and DIN/EN regulations.

– Always follow any safety regulations specific to your country.

– Follow the ESD regulations as described in the operational safety section of the operating in-

structions.

– Never make changes, however minor, unless you are totally aware of the effect they will have

on the overall functioning of the system.

– The vision teach station must always be set up, retooled and maintained by appropriately trai-

ned personnel.

– Only use original spare parts and authorized accessories from ASM Assembly Systems. The

use of other parts will affect safety and may invalidate the liability for any consequential da-

mage.

– The vision teach station is only guaranteed to be safe to use if it is used for the intended pur-

pose and if the user manual is followed.

– Vision teach station operators must only carry out work for which they have been adequately

trained and with which they are totally familiar.

– If particularly hazardous situations are identified while the vision teach station is in use, the ma-

chine owner must immediately notify the manufacturer in writing so that appropriate action can

be taken to reduce the potential danger.

The base module is heavy.

– So make sure that you place the module on a stable surface.

– Ask a second person to help you carry the base module.

– Always make sure that the cameras are firmly bolted to the base module.