ISM-2000_OPE - 第58页
Software 3.1 rev_0 1 Edition 06/20 16 - Reproduction forbidden a Page 58 Storage Solut ions Soft ware Operating Manual 11. St atic Containers (F 8 ) From this window i t is possible to visualize and manage the positions …
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 57
Storage Solutions Software Operating Manual
If the operator scans a wrong reel, a red message error will appear:
If the scanned reel is correct, the status of the reel turns in green:
To know where to find the case with the reel to check, the software indicates FAST EXIT LAST
EXTRACTION or MAIN ACCUMULATOR LAST EXTRACTION
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 58
Storage Solutions Software Operating Manual
11. Static Containers (F8)
From this window it is possible to visualize and manage the positions (Cells) and events of each
Static Container installed.
NOTE:
• by pointing the mouse over a position in use you can visualize which unique ID/s
are inside.
• right click on a position in use, it will allow you to force manually this position as empty.
It allows to check the connection between the static container software module and the
hardware.
When a static container has a humidity level above the permitted limit, you can see a humidity
alarm with the indication of the static container to which it relates.
In case of ISM500, you can see other two buttons:
- Open doors: to open the doors of ISM500 with electronic locks
- Setup: to configure the ISM500
Software 3.1 rev_01 Edition 06/2016 - Reproduction forbidden
a
Page 59
Storage Solutions Software Operating Manual
12. Stats (F9)
If the Humidity Control Unit is installed, this module permits to monitor and the control of the
humidity for any cabinet installed. It is possible to make search regarding date and reel code, to
have the life of the reel concerning humidity and temperature. If a “sensitive” reel, for which a
humidity limit has been selected, enter in a humidity condition RH>5%, the software start the
countdown and will block the reel if the maximum tolerance limit will be overtaken. With this
module you will have a complete traceability of humidity for any single component.