00198505-01_SM_SIPLACE_SmartFeeder_EN - 第10页
10 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 Table of contents 10.13.2 Fitting the handle assembly .. 280 10.13.3 Replacing spare parts on the handle .. 282 10.13.3.1 Removing the control panel, board a…
9Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
Table of contents
10.3.2 Removing/fitting the right front cover.. 231
10.3.3 Rear side wall on the right.. 231
10.3.3.1 Removing the rear side wall on the right.. 231
10.3.3.2 Fitting the rear side wall on the right.. 232
10.4 EDIF.. 234
10.4.1 Removing the EDIF.. 234
10.4.2 Fitting the EDIF.. 235
10.5 Pickup window.. 236
10.5.1 Removing the pickup window.. 237
10.5.2 Fitting the pickup window.. 239
10.5.3 Replacing the Öffner pickup window.. 241
10.6 Splice sensor.. 241
10.6.1 Removing the splice sensor (dummy).. 242
10.6.2 Fitting the splice sensor dummy.. 243
10.6.3 Filler piece.. 244
10.6.3.1 Removing the filler piece.. 244
10.6.3.2 Fitting the filler piece.. 246
10.7 Drives and gears.. 248
10.7.1 Shifted gear for tape drive.. 248
10.7.1.1 Removing shifted gears 1 and 2.. 249
10.7.1.2 Fitting shifted gears 1 and 2.. 249
10.7.1.3 Removing shifted gear 3.. 250
10.7.1.4 Fitting shifted gear 3.. 250
10.7.2 Shifted gears for foil drive.. 251
10.7.2.1 Removing the shifted gears.. 252
10.7.2.2 Fitting the shifted gears.. 252
10.7.3 Tape drive (hybrid stepping motor).. 254
10.7.3.1 Removing the tape drive.. 254
10.7.3.2 Fitting the tape drive.. 255
10.7.4 Foil drive (hybrid stepping motor).. 256
10.7.4.1 Removing the foil disposal drive.. 257
10.7.4.2 Fitting the foil disposal drive.. 257
10.8 Foil rocker.. 259
10.8.1 Foil rocker assembly.. 259
10.8.1.1 Foil rocker.. 260
10.8.1.2 Light barrier transmitter.. 261
10.8.1.3 Roller/roller axis rocker.. 264
10.9 Rocker.. 267
10.9.1 Rocker assembly.. 267
10.9.1.1 Removing the rocker.. 268
10.9.1.2 Fitting the rocker.. 269
10.9.2 Spare parts on the rocker.. 270
10.9.2.1 Replacing the pressure spring and spring support.. 271
10.9.2.2 Replacing the tamp wheel, wiper and roller axis.. 272
10.10 Foil disposal flap.. 275
10.10.1 Replacing the flap.. 276
10.11 Foil disposal blade.. 276
10.11.1 Removing the blade.. 277
10.11.2 Fitting the blade.. 277
10.12 Leaf spring.. 278
10.12.1 Replacing the leaf spring.. 278
10.13 Handle assembly with control panel.. 279
10.13.1 Removing the handle assembly.. 279
10 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
Table of contents
10.13.2 Fitting the handle assembly.. 280
10.13.3 Replacing spare parts on the handle.. 282
10.13.3.1 Removing the control panel, board and window for the control panel.. 282
10.13.3.2 Fitting the control panel, board and control panel window.. 283
1 Introduction
1.1 Safety Instructions
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 11
1 Introduction
This manual describes service work performed on the SIPLACE® feeder modules SmartFeeder
2x8mmX and SmartFeeder 4–104mmX.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.