00198505-01_SM_SIPLACE_SmartFeeder_EN - 第140页
8 Repairs to SmartFeeder 2x8 mm X 8.5 Pickup window 140 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 8.5.1 Removing the pickup window ► Remove the 2 marked screws fastening the rel- evant pickup window and tap…
8 Repairs to SmartFeeder 2x8 mm X
8.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 139
8.5 Pickup window
Required spare part
Fig.45: Pickup window assy. /X2x8
Feeder module Position Item no. Designation
SmartFeeder 2x8mm X 1 03078710-xx
03077394-0102
Pickup window assy. /X2x8
Axis pickup window /X2x8
2 03053708Sxx
03077823-xx
Rocker lever /X2x8
(with collar screw)
Collar screws /X2x8
3 03077354-xx
03010210-xx
03010214-xx
Tape duct /X2x8
ISO 7045 - M2.5 x 8-A2-50-H
ISO 7045 - M2.5 x 16-A2-50-H
4 03077381-xx Pressure bracket /X2x8
5 03077928-xx Pressure spring 0.85x5.1x18.3
Required tools
●
Phillips screwdriver
●
Tweezers
●
Allen key 1.5
8 Repairs to SmartFeeder 2x8 mm X
8.5 Pickup window
140 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
8.5.1 Removing the pickup window
► Remove the 2 marked screws fastening the rel-
evant pickup window and tape duct to the feeder
module. (1)
► Lift the pickup window up and off, together with
the tape duct. (2)
► Also remove the pressure spring and the pres-
sure bracket, to prevent these being lost.(3)
► Remove the fitting screw(4), which is in the tape
duct and which fixes the pickup window axis.
► Loosen the axis on the pickup window(5) and
push this out of the tape duct.
► Lift the pickup window up and off.(6)
► Loosen the collar screw(7) on the rocker lever
and remove this.
8 Repairs to SmartFeeder 2x8 mm X
8.5 Pickup window
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 141
8.5.2 Fitting the pickup window
► Insert the rocker lever and fix it into place with the
marked collar screw.(1)
► Fit the pickup window onto the tape duct from
above.(2)
► Push the axis into the tape duct and fix this into
place.(3)
► Use the fitting screw to fix the pickup window to
the tape duct.(4)
► Insert the pressure spring and then the pressure
bracket on it.(5)
► Insert the pickup window and tape duct as
shown.(6)
► Use the 2 marked screws (with which the pickup
window was previously fastened) to fasten the
pickup window and tape duct.(7)