00198505-01_SM_SIPLACE_SmartFeeder_EN - 第228页
10 Repairs to SmartFeeder 24 - 104 mm X 10.2 Rear sliding guide 228 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 10.1.2 Fitting the sliding foil ► Press the sliding foil slightly together. ► Push the sliding f…
10 Repairs to SmartFeeder 24 - 104 mm X
10.1 Front sliding guide/sliding foil
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 227
10 Repairs to SmartFeeder 24 - 104 mm X
Feeder module Item no. Description
SmartFeeder 24mm X 00141373- xx
00141393-xx
SIPLACE SmartFeeder 24mm X
SIPLACE SmartFeeder 24mm X with splice sensor
SmartFeeder 32mm X 00141374- xx
00141394-xx
SIPLACE SmartFeeder 32mm X
SIPLACE SmartFeeder 32mm X with splice sensor
SmartFeeder 44mm X 00141375- xx
00141395-xx
SIPLACE SmartFeeder 44mm X
SIPLACE SmartFeeder 44mm X with splice sensor
SmartFeeder 56mm X 00141376- xx
00141396-xx
SIPLACE SmartFeeder 56mm X
SIPLACE SmartFeeder 56mm X with splice sensor
SmartFeeder 72mm X 00141397-xx SIPLACE SmartFeeder 72mm X with splice sensor
SmartFeeder 88mm X 00141398-xx SIPLACE SmartFeeder 88mm X with splice sensor
SmartFeeder 104mm X 00141399-xx SIPLACE SmartFeeder 104mm X with splice sensor
10.1 Front sliding guide/sliding foil
Required spare part
Fig.83: Sliding foil
Feeder module Item no. Designation
SmartFeeder 24 – 104mmX 03019604Sxx Sliding foil, X-feeder JUM-S-06LY
Required tools
●
Sliding foil remover
10.1.1 Removing the sliding foil
► Place the feeder module carefully down on its
side, onto a stable, level and clean surface.
► Place the sliding foil remover into the sliding
guide, as shown in the diagram.
► Lever the sliding foil out of the engaged position.
► Pull the sliding foil out of the sliding guide, to-
wards the front.
10 Repairs to SmartFeeder 24 - 104 mm X
10.2 Rear sliding guide
228 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
10.1.2 Fitting the sliding foil
► Press the sliding foil slightly together.
► Push the sliding foil into the sliding guide, from
the front, as far as the end stop.
► Turn the sliding foil, until the slit can be fully seen
and the sliding foil engages audibly.
10.2 Rear sliding guide
Required spare part
Fig.84: Sliding guide, back
Feeder module Item no. Designation
SmartFeeder 24 – 104mmX 03003994- xx Sliding guide / back L200
03010211-xx ISO 7045 - M2.5 x 10-A2-50-H (4x)
Required tools
●
Phillips screwdriver 0.6Nm
10 Repairs to SmartFeeder 24 - 104 mm X
10.3 Side covers
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 229
10.2.1 Removing the sliding guide
► Turn the feeder module so that its underside is at
the top.
► Remove the 4 marked screws on the sliding
guide.
► Lift the sliding guide upwards and off.
10.2.2 Fitting the sliding guide
► Turn the feeder module so that its underside is at
the top.
► Fit the slide bearing – as illustrated – to the un-
derside of the feeder module.
Observe the arrangement of the drilled holes in
the slide bearing.
► Push the slide bearing, as shown, forward to-
wards the front slide bearing, as far as the stop.
► Now lower the two snap tabs of the slide bearing
into the openings provided on the underside of
the feeder module.
► Use the 4 screws to fix the slide bearing with
0.6Nm to the feeder module.
10.3 Side covers
Required spare parts
Side plate left X24 -104Smart Cover right X24 -104Smart Side wall right X24 -104Smart
Feeder module Item no. Designation
SmartFeeder 24 – 104 mm X 03113301Sxx Side plate left X24 104Smart
03122209Sxx Cover right X24-104Smart
03122209Sxx Side wall right X24-104Smart
Required tools
●
Phillips screwdriver 0.6Nm
●
TORX screwdriver 0.6Nm, size T8