00198505-01_SM_SIPLACE_SmartFeeder_EN - 第232页
10 Repairs to SmartFeeder 24 - 104 mm X 10.3 Side covers 232 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 ► Loosen the screws with the tool specified in the diagram. The different screw types are color-coded i…
10 Repairs to SmartFeeder 24 - 104 mm X
10.3 Side covers
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 231
10.3.2 Removing/fitting the right front cover
► Carefully place the feeder module with the left side down on a stable, level and clean surface.
► Loosen or fasten the screws with the tool specified in the diagram.
The different screw types are color-coded in the diagram.
●
Blue dots mark those screws for which you need to use a TORX screwdriver with 0.6Nm.
Screw: RF-SN75-2.5 x 10-9.8 [03033798-xx]
●
Red dots mark those screws for which you need to use a Phillips screwdriver with 0.6Nm.
Screw: SN 213307-H-M2.5 x 5-A2-70 [03071822-xx]
10.3.3 Rear side wall on the right
10.3.3.1 Removing the rear side wall on the right
► Carefully place the feeder module with the
right side down on a stable, level and
clean surface.
► Remove the screw shown in the dia-
gramunder the foil rocker.
Use a size T8 TORX screwdriver for this.
► Remove the two screws marked in the dia-
gram.
Use a size T8 TORX screwdriver for this.
► Remove the sheet metal rocker (item no.
03110040-01).
10 Repairs to SmartFeeder 24 - 104 mm X
10.3 Side covers
232 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
► Loosen the screws with the tool specified in the diagram.
The different screw types are color-coded in the diagram.
●
Blue dots mark those screws for which you need to use a TORX screwdriver with 0.6Nm.
Screw: RF-SN75-2.5 x 10-9.8 [03033798-xx]
●
Red dots mark those screws for which you need to use a Phillips screwdriver with 0.6Nm.
Screw: SN 213307-H-M2.5 x 5-A2-70 [03071822-xx]
10.3.3.2 Fitting the rear side wall on the right
► Carefully place the feeder module with the left side down on a stable, level and clean surface.
► Fasten the screws with the tool specified in the diagram.
The different screw types are color-coded in the diagram.
●
Blue dots mark those screws for which you need to use a TORX screwdriver with 0.6Nm.
Screw: RF-SN75-2.5 x 10-9.8 [03033798-xx]
●
Red dots mark those screws for which you need to use a Phillips screwdriver with 0.6Nm.
Screw: SN 213307-H-M2.5 x 5-A2-70 [03071822-xx]
10 Repairs to SmartFeeder 24 - 104 mm X
10.3 Side covers
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 233
► During assembly of the side wall, make
sure that the two nibs on the leaf spring
are outside the base unit and that the leaf
spring can swing downwards without ob-
struction.
► Carefully place the feeder module with the
right side down on a stable, level and
clean surface.
► Position the sheet metal rocker as shown
on the foil rocker.
Make sure that the threaded axis for the
foil rocker is fed through the metal sheet
as marked.
► Fasten the metal sheet with the two
screws marked in the diagram.
Use a size T8 TORX screwdriver with 0.6
Nm for this.
► Fasten the screw shown in the dia-
gramunder the foil rocker.
Use a size T8 TORX screwdriver with 0.6
Nm for this.