00198505-01_SM_SIPLACE_SmartFeeder_EN - 第253页
10 Repairs to SmartFeeder 24 - 104 mm X 10.7 Drives and gears Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 253 ► Fit shifted gear2 (1) with the smaller toothed wheel pointing downwards, onto the axis. Make s…
10 Repairs to SmartFeeder 24 - 104 mm X
10.7 Drives and gears
252 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
10.7.2.1 Removing the shifted gears
► Remove the right side cover (see 10.3.2 "Remov-
ing/fitting the right front cover" [}231])
► Remove the circlip(1) on gear stage1.
► Remove the washer (2) on gear stage1
► Remove gear stage 1.(3)
► Remove the circlip(4) on gear stage2.
► Remove the washer (5) on gear stage2
► Remove gear stage 2.(6)
► Remove the circlip(1) on toothed wheel6.
► Remove the washer (2) on toothed wheel6.
► Remove toothed wheel6.(3)
► Clean the marked parts of the housing with a lint-
free cloth and remove the grease from the gear
axes with a little ethanol.
► Slightly grease the gear axes (4,5,6) with Poly-
lubGLY801.
10.7.2.2 Fitting the shifted gears
► Fit the toothed wheel onto the axis.
Make sure that the extension of the axis guid-
ance(1) is on the top and that the toothed wheel
can engage in the teeth of the tamp wheel(2).
► Fit the washer into place.(3)
► Secure the toothed wheel with a new circlip.(4)
10 Repairs to SmartFeeder 24 - 104 mm X
10.7 Drives and gears
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 253
► Fit shifted gear2(1) with the smaller toothed
wheel pointing downwards, onto the axis.
Make sure that the smaller toothed wheel en-
gages down in the other toothed wheel(2).
► Fit the washer into place.(3)
► Secure the shifted gear with a new circlip.(4)
► Fit shifted gear1(1) with the smaller toothed
wheel pointing downwards, onto the axis.(1)
Make sure that the smaller toothed wheel en-
gages down in shifted gear 2 .(2)
The large toothed wheel for the shifted gear en-
gages up in the motor pinion.(3)
► Fit the washer into place.(4)
► Secure the shifted gear with a new circlip.(5)
► Fasten the right side cover (see10.3.2 "Remov-
ing/fitting the right front cover" [}231] ).
10 Repairs to SmartFeeder 24 - 104 mm X
10.7 Drives and gears
254 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
10.7.3 Tape drive (hybrid stepping motor)
Required spare part
Fig.91: Tape drive hybrid stepping motor assembly
Feeder module Item no. Designation
SmartFeeder 24 - 104 mm X 03116587-xx Hybrid stepping motor assembly X24-104Smart
Required tools
●
Phillips screwdriver 0.9Nm
●
TORX screwdriver 0.6Nm, size T8
●
Gauge for tape drive motor X24-104, item no. 03130748-xx
●
Circlip pliers for outer rings 3-10 mm
●
Tweezers
10.7.3.1 Removing the tape drive
► Remove the right side cover (see 10.3.2 "Remov-
ing/fitting the right front cover" [}231])
► Remove the left side plate (see 10.3.1 "Remov-
ing/fitting the left side plate" [}230]).
► Carefully place the feeder module on its right
side.
► Unplug the connector for the tape drive cable
from the connection on the control board.(1)
► Guide the tape drive cable through the marked
opening(2) to the other side of the feeder mod-
ule.