00198505-01_SM_SIPLACE_SmartFeeder_EN - 第268页

10 Repairs to SmartFeeder 24 - 104 mm X 10.9 Rocker 268 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 10.9.1.1 Removing the rocker ► Remove the right side wall (see 10.3.3 "Rear side wall on the right&quot…

100%1 / 286
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 267
10.9 Rocker
10.9.1 Rocker assembly
Required spare part
Fig.97: Rocker X24Smart assy.
Feeder module Item no. Designation
SmartFeeder 24mmX 03113047Sxx
03118789-xx
Rocker X24Smart assy.
Axis rocker X24Smart
SmartFeeder 32mm X 03116458Sxx
03118862-xx
Rocker X32Smart assy.
Axis rocker X32Smart
SmartFeeder 44mm X 03120765Sxx
03120771-xx
Rocker X44Smart assy.
Axis rocker X44Smart
SmartFeeder 56mm X 03114258Sxx
03120575-xx
Rocker X56Smart assy.
Axis rocker X56Smart
SmartFeeder 72mm X 03109630Sxx
03118863-xx
Rocker X72Smart assy.
Axis rocker X72Smart
SmartFeeder 88mm X 03120939Sxx
03120912-xx
Rocker X88Smart assy.
Axis rocker X88Smart
SmartFeeder 104mmX 03121119Sxx
03121088-xx
Rocker X104Smart assy.
Axis rocker X104Smart
SmartFeeder 24 - 104mmX 03118809-xx Collar screw, rocker X24-104
Required tools
●
Phillips screwdriver 0.6Nm
●
TORX screwdriver size T8, 0.6Nm
●
Flat-bladed screwdriver size 2
●
Tweezers
●
Optional split pin punch size 1.4
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
268 Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017
10.9.1.1 Removing the rocker
► Remove the right side wall (see 10.3.3 "Rear side
wall on the right" [}231])
► Remove the pressure spring.
To do this, use a pair of tweezers to pull the pres-
sure spring and spring holder sideways and out
of the feeder module base unit.
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Loosen the collar screw, which fixes the rocker
axis.
Use a size 2 flat-bladed screwdriver to help you.
► Use a size 1.4 split pin punch to push the rocker
axis out of the hole.
► Lift the rocker up and out of the feeder module
base unit.
10 Repairs to SmartFeeder 24 - 104 mm X
10.9 Rocker
Service Manual SIPLACE SmartFeeder 4 - 104 mm X 11/2017 269
10.9.1.2 Fitting the rocker
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Insert the rocker, as shown, from above into the
feeder module base unit.
Make sure that you can see through the drilled
hole for the rocker axis.
► Insert the collar screw into the hole and screw
tight.
► Carefully place the feeder module with the left
side down on a stable, level and clean surface.
► Push the rocker axis into the hole shown in the
diagram, as far as the stop.