MV-9_Chapter 5. Teaching.pdf - 第88页
MV -9 Use r Manual 5- 88 7) Multiple ta p i nspection - This inspection algorithm is to detect foreign m a terial and solder ball i n ta p area . Separate area between tap area and t ap from i nspection area to i nspect …
错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用
于要在此处显示的文字。 .
5-87
[Figure 5-93 Tap inspection result]
MV-9 User Manual
5-88
7) Multiple tap inspection
- This inspection algorithm is to detect foreign material and solder ball in tap area. Separate
area between tap area and tap from inspection area to inspect foreign material in each
area.
- Conduct teaching not to get off the tap area for inspection window.
a) Teaching method
(a) Draw inspection window in inspection area.
(b) Select preview in operation window, and select „for preview – tap separation‟ in
parameter.
(c) Select light type and image type for tap separation.
(d) Set binarization method and binarization value for tap separation checking preview
image
(e) Set noise removal for tap separation.
(f) Select „for preview – tap inspection‟ in parameter.
(g) Select light type and image type for tap inspection.
(h) Set binarization method and binarization value checking preview image
(i) Set noise removal for tap inspection.
(j) Set tap boundary noise removal.
(k) Enter normal criteria.
错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用
于要在此处显示的文字。 .
5-89
[Figure 5-94 Teaching example of multiple tap inspection window]
① Parameter description
Vertical tap inspection
- Check at this option to inspect tap of vertical direction.
Light for tap separation
- Light used to separate area between tap areas and tap. In general, vertical light is selected.
- Select light type and image type in common parameter for light for tap inspection, and
select horizontal + vertical light and R or L. In case of white light, select horizontal light and
L
Preview
- This is to select preview image type displayed in the screen. There are preview image for
tap separation and preview image for tap inspection.