Nordson_EFD_Rhino_SD2_XD2_Operating Manual

NORDSON CORPORA TION  AMHERST , OHIO  USA Rhino r SD2/XD2 Pumps Customer Product Manual Part 1073520-12 Issued 4/13 For parts and technical support, call the Nordson Industrial Coating Systems Customer Support Center a…

100%1 / 50
NORDSON CORPORATION AMHERST, OHIO USA
Rhinor
SD2/XD2 Pumps
Customer Product Manual
Part 1073520-12
Issued 4/13
For parts and technical support, call the Nordson
Industrial Coating Systems Customer Support Center at
(800) 4339319, or contact your local Nordson Representative.
This document is subject to change without notice.
Check http://emanuals.nordson.com/finishing for the latest version.
Part 1073520-12
E 2013 Nordson Corporation
Table of Contents
Safety 1.......................................
Qualified Personnel 1.........................
Intended Use 1..............................
Regulations and Approvals 1..................
Personal Safety 1............................
High-Pressure Fluids 1.....................
Fire Safety 2................................
Halogenated Hydrocarbon Solvent Hazards 2.
Action in the Event of a Malfunction 2...........
Disposal 2..................................
Description 3..................................
Theory of Operation 4........................
Air Motor 4...............................
Hydraulic Section 4........................
Repair 7......................................
Consumable Items 7.........................
Break Down the Pump 8......................
Repairs to the Hydraulic Section 8...........
Repairs to the Air Motor 8...................
Standard and Temperature Conditioned Hydraulic
Sections 10..................................
Disassemble the Hydraulic Section 10.........
Assemble the Hydraulic Section 10...........
Rebuild the Packing Gland 12..................
Stainless Steel Hydraulic Section 14.............
Disassemble the Hydraulic Section 14.........
Assemble the Hydraulic Section 14...........
Air Motor 16..................................
Replace the Trip-Rod U-Cup 16..............
Replace a Pilot Valve 18....................
Replace the Supply
Tube Quad- and O-Rings 20.................
Replace the Piston Rod
Retainer U-Cup and O-Ring 20...............
Replace the Piston Assembly 22.............
Assemble the Pump 24........................
Parts 26.......................................
Common Parts 26.............................
Air Motor 28..................................
5.8 Cubic Inch Standard and
Temperature Conditioned Hydraulic Sections 34...
8.1 Cubic Inch Standard and
Temperature Conditioned Hydraulic Sections 36...
8.1 Cubic Inch Stainless Steel Hydraulic Section 38
Tools 39.....................................
Kits 40.......................................
Mounting Hardware 41.........................
30/55-Gallon Drum Unloaders 41.............
5-Gallon Pail Unloaders 41..................
Specifications 42...............................
Air Motor 42..................................
Hydraulic Section 42..........................
Air Requirements 43..........................
Pneumatic Schematic 44
.......................
Preventive Maintenance 45......................
Contact Us
Nordson Corporation welcomes requests for information, comments, and
inquiries about its products. General information about Nordson can be
found on the Internet using the following address:
http://www.nordson.com.
Address all correspondence to:
Nordson Corporation
Attn: Customer Service
555 Jackson Street
Amherst, OH 44001
Notice
This is a Nordson Corporation publication which is protected by copyright.
Original copyright date 2006. No part of this document may be
photocopied, reproduced, or translated to another language without the
prior written consent of Nordson Corporation. The information contained
in this publication is subject to change without notice.
Trademarks
Nordson, the Nordson logo, and Rhino are registered
trademarks of Nordson Corporation.
All other trademarks are the property of their respective owners.
Change Record i
Part 1073520-12
E 2013 Nordson Corporation
Change Record
Revision Date Change
A09 6/09 Removed data on customer-specific pumps 1082087, 1082225, 1082478, 1082503,
and 1084887. Refer to manual 1096339A for customer-specific pump data.
A10 8/09 Add part number for new rod assembly design.
A11 11/10 Add new Drive Train Kit part numbers.
A12 4/13 Add XD2 Stainless Steel Packing Gland internal components kit 1603003.