Maintenance Manual - 第138页

RL131 MAINTENANCE MANUAL 7.3 PCB Trans fer Unit DA8MEC-Z4-000-A 0 7.3-1 7.3. PCB Transfer Unit DA8MEC-Z4-000-A0 7.3.1 X-Y Table Unit No. N610055746AA  Oiling Period No. Item Task Oiling volume Description 1. Ball screw …

100%1 / 250
RL131
MAINTENANCE MANUAL
7.2 Periodic Inspection Items
DA8MEC-Z0-020-A0
7.2-8
7.2.6 Waste Disposal (whenever Filled)
The following table summarizes the disposal of wastes to be performed whenever filled.
For the details of inspection positions and lubrication method, refer to the subsequent sections.
Numbers in the Unit column show the relevant sections to be referred to.
Inspection (When Filled)
Unit No.
Item Task Description
a.
Tape waste receptacle
Dispose of tape wastes.
(Depending on the production amount, dispose of
tape wastes once a shift or once a day.)
7.8.1
Cut Waste Bottle
and Tape Waste
Receptacle
b.
Lead cut waste bottle
Dispose of tape wastes.
(Depending on the production amount, dispose of
tape wastes once a shift or once a day.)
RL131
MAINTENANCE MANUAL
7.3 PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3-1
7.3. PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3.1 X-Y Table
Unit No. N610055746AA
Oiling
Period
No.
Item Task
Oiling
volume
Description
1.
Ball screw (X)
Monthly
2.
Ball screw (Y)
3 cm
3
each
Position: Thread
3.
LM guide (X)
2 cm
3
each
4.
LM guide (Y)
2 cm
3
each
Position: Rail surface
3
months
5.
LM guide
0.25 cm
3
2. Ball screw (Y)
5. LM guide
1. Ball screw (X)
3. M guide (X)
4. LM guide (Y)
RL131
MAINTENANCE MANUAL
7.3 PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3-2
7.3.2 Positioner
Unit No. N610061375AA
Inspection
Period
No.
Item Task Description
Weekly
a.
Reference pin
Make sure that the reference pin is not worn or
damaged.
Oiling
Period
No.
Item Task
Oiling
volume
Description
1.
Shaft rotor
1 to 2
drops
3
months
2.
Shaft sliding surface
Moderate
amount
Wipe it with a cloth dampened with
machine oil.
2. Shaft sliding surface
1. Shaft rotor
a. Reference pin