Maintenance Manual - 第142页

RL131 MAINTENANCE MANUAL 7.3 PCB Trans fer Unit DA8MEC-Z4-000-A 0 7.3-5 7.3.5 PCB Transfer Unit Unit No. N610060945AA  Inspection Period No. Item Task Des cription Make sure that the lever m oves up/do wn smoothl y. Mak…

100%1 / 250
RL131
MAINTENANCE MANUAL
7.3 PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3-4
7.3.4 Transfer Arm Interlock Unit
Unit No. N610066187AA
Inspection
Period
No.
Item Task Description
Monthly
a.
Cam follower
Make sure that the cam follower turns smoothly.
Oiling
Period
No.
Item Task
Oiling
volume
Description
Monthly
1.
Cam follower
0.1 cm
3
Position: Running surface
a / 1. Cam follower
RL131
MAINTENANCE MANUAL
7.3 PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3-5
7.3.5 PCB Transfer Unit
Unit No. N610060945AA
Inspection
Period
No.
Item Task Description
Make sure that the lever moves up/down smoothly.
Make sure that the lever slides smoothly.
a.
Lever
Make sure that the lever moves lightly at the support.
Daily
b.
Transfer pin
Make sure that the transfer pin is inserted into the PCB
hole correctly.
c.
Belt
Make sure that the belt is not worn.
d.
Shaft
Sliding surface: Remove dirt or dust.
Make sure that the transfer pin claw is not loosened.
Weekly
e.
Transfer pin
Make sure that the transfer pin claw is not damaged or
deformed.
Oiling
Period
No.
Item Task
Oiling
volume
Description
1.
Lever support
1 to 2
drops
3
months
2.
Shaft
0.25 cm
3
Position: Sliding surface
1. Lever support
b. / e. Transfer pin
d. / 2. Shaft
a. Lever
c. Belt
RL131
MAINTENANCE MANUAL
7.3 PCB Transfer Unit
DA8MEC-Z4-000-A0
7.3-6