Maintenance Manual - 第169页
RL131 MAINTENANCE MANUAL 7.7 Anvil Unit DA8MEC-Z4-400-A 0 7.7-6 12. Turn the plug of the reduc tion gear clock wise to retig hten. 13. Retighten the s crews and r eattach the be lt cover. 14. Retighten the s crews of the…
RL131
MAINTENANCE MANUAL
7.7 Anvil Unit
DA8MEC-Z4-400-A0
7.7-5
8. If oil nearly comes out, stop oiling once and turn the drain cock lever 90° as shown below. (This closes the
drain plug.)
9. Reattach the drain plug to the drain cock by turning it clockwise.
(Be sure to secure the plug in place. This prevents oil from spilling over even if the drain cock is opened
inadvertently.)
10. Press the hose against the hose clip to reattach.
11. Restart oiling.
Add oil from the oil port until oil level is above the center of the oil gauge while observing the oil gauge.
Oil port
Oil gauge
Drain plug
Hose clip
Hose
RL131
MAINTENANCE MANUAL
7.7 Anvil Unit
DA8MEC-Z4-400-A0
7.7-6
12. Turn the plug of the reduction gear clockwise to retighten.
13. Retighten the screws and reattach the belt cover.
14. Retighten the screws of the front center cover and lock it in place.
Plug
Belt cover
Front center cover
RL131
MAINTENANCE MANUAL
7.8 Pneumatic Unit
DA8MEC-Z0-300-A0
7.8-1
7.8. Pneumatic Unit
DA8MEC-Z0-300-A0
7.8.1 Cut Waste Bottle and Tape Waste Receptacle
Unit No. N610077282AA / N610070306AA
Inspection
Period
No.
Item Task Description
Weekly
a.
Filter
Clean the filter using air blow.
(Replace it if damaged.)
When
filled
b.
Tape waste receptacle
Dispose of tape wastes.
(Depending on the production amount, dispose of tape
wastes once a shift or once a day.)
When
filled
c.
Lead cut waste bottle
Dispose of tape wastes.
(Depending on the production amount, dispose of tape
wastes once a shift or once a day.)
b. Tape waste receptacle a. Filter
c. Lead cut waste
bottle