Maintenance Manual - 第196页

RL131 MAINTENANCE MANUAL 8.5 Feeder Un it DA8MEC-W 4-400-A0 8.5-1 8.5. Feeder Unit DA8MEC- W 4-400-A0 8.5.1 Replacing Feeders Unit No. N610071917AA , N6100719 18AA, N610071 919AA, N61007 1920AA, 8.5.1 Replacing Fee ders …

100%1 / 250
RL131
MAINTENANCE MANUAL
8.4 Anvil Unit
DA8MEC-W4-400-A0
8.4-4
RL131
MAINTENANCE MANUAL
8.5 Feeder Unit
DA8MEC-W4-400-A0
8.5-1
8.5. Feeder Unit
DA8MEC-W4-400-A0
8.5.1 Replacing Feeders
Unit No. N610071917AA, N610071918AA, N610071919AA, N610071920AA,
8.5.1 Replacing Feeders
Replacing Feeders
1.
1. Turn OFF the power switch of the machine. (Be sure to do this before replacing feeders.)
The part supply unit moves backward.
2. Detach the connector and bolts (x2) then, detach the component feeder.
Mounting Feeders
2.
1. Mount the feeder so that the pin at the front side of
the feeder carriage may fit in the hole of the part
supply unit.
=REMARKS=
Make sure that the holder of the component feeder
engages with the roller of the cylinder underneath.
Improper engagement could cause damage to the
component feeder.
2. Secure the bolt (M6x2) and bolt (M6x40).
3. Connect the connector.
4. Turn ON the power switch of the machine. This completes the procedure.
=REMAKRS=
Make sure the power switch is OFF when replacing the feeder. Working with the power ON could
cause damage to the I/O board fuse.
Feeder
Cylinder roller
Bolt (M6
´
40) Bolt (M6
´
20)
Connector
Pin
RL131
MAINTENANCE MANUAL
8.5 Feeder Unit
DA8MEC-W4-400-A0
8.5-2
8.5.2 Replacing Tape Cutter
Unit No. N610071917AA, N610071918AA, N610071919AA, N610071920AA,
8.5.2 Replacing Tape Cutter
Replacing Tape Cutter
3.
1. Turn OFF the power switch of the machine. (Be sure to
do this before replacing feeder.)
Detach the feeder from the machine.
== Refer to ‘8.5.1 Replacing Feeders’.
2. Loosen the bolt to remove the tape cutter.
3. Mount a new tape cutter to match the positioning pin.
=REMARKS=
Make sure the positioning pin fits in the block
correctly when installing the tape cutter.
Make sure the cutter blades are set in the lower
roller as shown below.
Do not touch the nut securing the cutter blade
unnecessarily. Removing the nut changes the
performance of the tape cutter.
Positioning pin
Replacing the tape cutter
Tape cutter
Bolt
Block
Nut
Cutter blade
Lower roller
Installing the cutter blade