00193786-01 - 第10页

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual Page 10 of 236 ©Siemens AG, all rights reserved 2012037 – 2012040 (PickUpErrorsLocX) Additional to a new Process Program, the PCB has to reach the processing convey…

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

1 Introduction

This document describes the SECS interface version 505.xx provided on the SIPLACE.

The SEMI Equipment Communication Standard (SECS) is published by Semiconductor

Equipment and Materials International (SEMI). It defines a computer to computer

communications interface between a unit of factory Equipment and a Host Computer.

This Equipment complies to the SECS-II standard, all SECS-II message used in GEM are

implemented. The SIPLACE complies to the following versions of standards:

E5-1994 (SECS-II)

SEMI Document #2758, Line 1 Item #1 (The Year 2000 issue)

1.1 Changes from Host Interface Manual V502.01

• Section 3.10 Spooling:

SafeSpoolMode added

• Section 3.11 Remote Command:

Remote Start/Stop added

• Section 6: New Variables:

VID 2512001 TRACE_PCB_DATA

VID 2512002 TRACE_ALL_COMPONENTS

VID 2512003 TRACE_SINGLE_CIRCUIT

VID 2012046 TAPE_INFO

VID 2012047 TABLE_ID

VID 2012048 TOWER_ID

ECID 1002942 MAX_TIME_TO_STOP

ECID 1002943 SAFE_SPOOL_MODE

• Section 7:

New Report: RPTID 46 TraceData, RPTID 47 SpliceDetected

Change: RPTID 27 Variables TAPE_INFO and TABLE_ID added

• Section 8: New Section “Traceability” inserted

CEID 2211039 FM_GEM_SPOOL_FULL,

CEID 2211040 FM_REMOTE_START,

CEID 2211040 FM_REMOTE_STOP

“Traceability”

CEID 2510001 TraceData,

CEID 2510002 SpliceDetected,

CEID 2510003 TraceOn,

CEID 2510004 TraceOff

• Section 6: Variables

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual

2012037 – 2012040 (PickUpErrorsLocX) Additional to a new Process Program, the PCB

has to reach the processing conveyor, for a data item reset.

1.2 Changes from Host Interface Manual V503.01

A significant change since Gem 503.01 is support for the new SIPLACE HF machine.

This machine is available with a 12-nozzle or 6-nozzle revolver head or with a TwinHead.

All data from the new TwinHead is reported in the same way as the data from the

revolver heads, i.e. from the point of view of the GEM HOST, there is no real difference

between the individual placement heads. Thus, the 12-nozzle revolver head, the 6-nozzle

revolver head and the TwinHead are handled in exactly the same way, the only

difference being that the heads have 12, 6 or 2 segments. Thus, 12, 6 or 2 elements exist

in the data structures. In version 503 of GEM, list elements that were not needed were

empty. In contrast, in version 504, list elements that are not required are omitted.

As a result of this, variable names that contain the abbreviation 'REV' for revolver head

must be renamed. Variable numbers, content and structure, however, remain unchanged.

• Section 6: Name of Variables changed:

VID 1312001 HEIGHTHEAD1

VID 1312002 GANTRYINFO1

VID 1312003 PLACEINFO1

VID 1312004 PICKUPINFO1

VID 1312006 VACUUMDATA1

VID 1312007 SEGMENTINFO 1

VID 1312008 PLACEINFO1SUB1

VID 1412001 HEIGHTHEAD2

VID 1412002 GANTRYINFO2

VID 1412003 PLACEINFO2

VID 1412004 PICKUPINFO2

VID 1412006 VACUUMDATA2

VID 1412007 SEGMENTINFO2

VID 1412008 PLACEINFO2SUB1

VID 2312001 HEIGHTHEAD3

VID 2312002 GANTRYINFO3

VID 2312003 PLACEINFO3

VID 2312004 PICKUPINFO3

VID 2312006 VACUUMDATA3

VID 2312007 SEGMENTINFO3

VID 2312008 PLACEINFO3SUB1

VID 2412001 HEIGHTHEAD4

VID 2412002 GANTRYINFO4

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

VID 2412003 PLACEINFO4

VID 2412004 PICKUPINFO4

VID 2412006 VACUUMDATA4

VID 2412007 SEGMENTINFO4

VID 2412008 PLACEINFO4SUB1

• Section 6: Variables:

2012041 – 2012044 (PickUpDataResetPointLocX) will be updated when „Pick-Up Error“

data item (PickUpErrorsLocX was reset.

1.3 Changes from Host Interface Manual V504.01

A significant change since Gem 504.01 is support for the new SIPLACE HF/3 machine.

This machine is available with a 12-nozzle or 6-nozzle revolver head or with a TwinHead.

• Section 4.2: Data Item Dictonary :

New values für PickUpResult, PlacementResult and ErrorCode added.

• Section 6: Variables :

New variables for PCB barcodes added:

VID 912021 PCBBCProc1Conv1

VID 912022 PCBBCProc1Conv2

VID 912023 PCBBCProc2Conv1

VID 912024 PCBBCProc2Conv2

• Corrections:

Report 29 PlaceError corrected

1.4 SECS-II Clarifications

The SIPLACE uses the following SECS-II conventions:

1.4.1 Data Format Types

Where the Standards permit a choice of data item types, the choice has been made as

described in section „Message Detail“.

For outgoing messages, the Equipment always sends Data Items of the exact format

shown. For some incoming messages, the Equipment „forgives“ minor host errors. For

example, the Equipment may accept a U1 Data Item where a U2 format was expected.

We recommend the Host attempt to use the formats shown.

1.4.2 Data Item Length Bytes

For messages sent by the Equipment, the number of length bytes in Data Items is always

the minimum required to contain the Data Item length.