00193786-01 - 第226页

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual Page 226 of 236 ©Siemens AG, all rights reserved <SEGMENTINFO3> will be resetted. 2010024 PCBreadyProc2Conv1 Placement is finished for the PCB in the conveyor…

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

2010006 RefRunGantry1 Reference run complete for the gantry 1

axis

2010007 RefRunGantry2 Reference run complete for the gantry 2

axis

2010008 TableDownload Software downloaded to the table and

<SOFTWAREREVTABLE> will be

updated.

2010009 SingleCircuitOmit The machine signals that it found a single

circuit to omit (Ink Punkt)

Variables HEADID (VID 1022030),

GANTRYID (2012028) and

GANTRYDROUPID (2012029)

are valid.

2010010 TapeCut1 Tape cut at location 1 1

2010011 TapeCut2 Tape cut at location 2 1

2010015 MachineReStarted SIPLACE station is re-booting 1

2010016 PickupError An Pickup-Error has occured and

<SEGMENT>, <COMPONENTNAME>,

<MASCHINESIDE>, <LOCATION>,

<TRACKNUMBER>, <DIVISION>,

<LEVEL>, <GANTRYID>,

will be updated

2010017 PlaceError An Place-Error has occured and

<SEGMENT>,

<REFERENCEDESIGNATOR>,

<COMPONENTNAME>, <GANTRYID>,

<GANTRYGROUPID>, <HEADID>,

<PACKAGEFORMNUMBER> and

<PLACEERRORDESCRIPTION> will be

updated

2010018 RefRunGantry3 Reference run complete for the gantry 3

axis

2010019 RefRunGantry4 Reference run complete for the gantry 4

axis

2010033 MTCDownload Software downloaded to the MTC and

<SOFTWAREREVMTC> will be updated.

2010021 PCBstartProc1Conv1 Start of the placement process for the

PCB in the conveyor 1 processing area 1

<GANTRYINFO1>, <GANTRYINFO4>,

<SEGMENTINFO1 >,

will be resetted.

2010022 PCBreadyProc1Conv1 Placement is finished for the PCB in the

conveyor 1 processing area 1.

2010023 PCBstartProc2Conv1 Start of the placement process for the

PCB in the conveyor 1 processing area 2

<GANTRYINFO2>, <GANTRYINFO3>,

<SEGMENTINFO2 >,

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual

will be resetted.

2010024 PCBreadyProc2Conv1 Placement is finished for the PCB in the

conveyor 1 processing area 2.

2010025 PCBstartProc1Conv2 Start of the placement process for the

PCB in the conveyor 2 processing area 1

<GANTRYINFO1>, <GANTRYINFO4>,

<SEGMENTINFO1 >,

will be resetted.

2010026 PCBreadyProc1Conv2 Placement is finished for the PCB in the

conveyor 2 processing area 1.

2010027 PCBstartProc2Conv2 Start of the placement process for the

PCB in the conveyor 2 processing area 2

<GANTRYINFO2>, <GANTRYINFO3>,

<SEGMENTINFO2 >,

will be resetted.

2010028 PCBreadyProc2Conv2 Placement is finished for the PCB in the

conveyor 2 processing area 2.

2010029 PickPlaceStartProc1 The machine is starting to pick up and

place components in Processing1 Area.

2010030 PickPlaceStopProc1 The Pick/Place process in Processing 1

Area has been interrupted or is finished.

2010031 PickPlaceStartProc2 The machine is starting to pick up and

place components in Processing2 Area.

2010032 PickPlaceStopProc2 The Pick/Place process in Processing 2

Area has been interrupted or is finished.

2010034 TapeCut3 Tape cut at location 3 1

2010035 TapeCut4 Tape cut at location 4 1

Other Error-Events

CEID Name Description

2211001 FM_ABH_KEIN_BE Component not at nozzle after pick-

2211002 FM_BEST_KEIN_BE Component not at nozzle before

placement

2211003 FM_ABH_SPURLEER Track empty, no component during

pick-up

2211004 FM_FM_SPURLEER Flatpack magazine is empty

2211005 FM_MHS_CRASH_GEFAHR Second gantry in travel range

2211006 FM_VAK_DELTA_GRENZE_SP RV: intervals open - closed vacuum

values too low

2211007 FM_VAK_OFFEN_GRENZE_SP RV: vacuum values for open nozzles

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

CEID Name Description

too high

2211008 FM_VAK_KUBISCH_SP RV: cubic vacuum values faulty

2211009 FM_VAK_NICHT_KUBISCH_SP RV: non-cubic vacuum values faulty

2211010 FM_VAK_FHL_NR_UNBEK_SP RV: unknown vacuum error number

2211011

FM_CAN_MSG_ABWERFEN_SP

RV: Defective motor for rejecting

2211012

FM_TW_SP_PINOLE_GEZOGEN

Caution: Sleeve in extended

position, do not move placement

head!

2211013 FM_VAK_SEGM_UNDICHT_SP Leak in RV-head segment after

placement

2211015 FM_BZ_SCHUETZ_SZ4 Software enable relay defective

2211016 FM_BZ_DRUCKTLUFT Compressed air failure for too long

2211017 FM_BZ_UNBEK_ZUST Status unknown

2211018 FM_BZ_SCHUTZ Cover not correct

2211019 FM_BZ_HALTEPUNKT Break point not defined

2211020 FM_BZ_SCHLUESSEL Unknown key-switch message

2211021 FM_BZ_SENDENBZ Unknown message code to BZ

2211022 FM_BZ_HAUPTSCHUETZ Hardware defect (relay)

2211023 FM_GUI_TEXT_BB_ERR_WAR

TE_ENDE_PORT_KPF_REF

Gantry and head reference run

failed

2211024 FM_GUI_TEXT_BB_ERR_WAR

TE_ENDE_HOEHE_REF

Height reference run failed

2211025 FM_GUI_TEXT_BB_ERR_FAHR

E_POSITION

Unable to move gantry

2211027

FM_GUI_TEXT_TI_FOERD_FOLIE

Error upon cover foil of a tape

feeder

2211028 FM_BETR_DATEN_NOK Error upon producing operating data

for a HOST system

2211029 FM_HEAD_TIMEOUT Timeout during head functions

2211031 FM_NOZZLE_NOK Nozzle cannot be changed, function

not executed

2211039 FM_GEM_SPOOL_FULL Spoolfile is nearly full, machine

stopped (only if safespoolmode is

activ)

2211040 FM_REMOTE_START Remote Start by Gem-Host

2211041 FM_REMOTE_STOP Remote Stop by Gem-Host