00193786-01 - 第48页

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual Page 48 of 236 ©Siemens AG, all rights reserved 3.7 Equipment Terminal Services The SIPLACE supports exchange of free text messages with the Host (SECS Stream 10). …

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

3.6.2 Related Collection Events

There are CEID's related to then Material Movement Capability. For a more complete

listing of these collection events, please see "Appendix B -- Collection Events".

The Events with a '2' at the end of the Event name (e.g., PCBreachedOutputConveyor2)

refer to the 2

belt of a dual conveyor.

Collection Event CEID HS50,

S25

PCBreachedInputConveyor 610031

✔ ✔

PCBreachedFirstProcessingConveyor 610061

✔ ✔

PCBreachedIntermediateConveyor 610062

✔

PCBreachedSecondProcessingConveyor 610063

✔

PCBreachedOutputConveyor 610033

✔ ✔

PCBreachedInputConveyor2 610034

✔ ✔

PCBreachedFirstProcessingConveyor2 610066

✔ ✔

PCBreachedIntermediateConveyor2 610067

✔

PCBreachedSecondProcessingConveyor2 610068

✔

PCBreachedOutputConveyor2 610036

✔ ✔

TransportWidthMeasured 610037

✔ ✔

TransportWidthMeasured2 610044

✔ ✔

TakeOutInConv 610051

✔ ✔

TakeOutProcessing1Conv 610069

✔ ✔

TakeOutIntermediateConv 610070

✔

TakeOutProcessing2Conv 610071

✔

TakeOutOutConv 610052

✔ ✔

TakeOutInConv2 610053

✔ ✔

TakeOutProcessing1Conv2 610072

✔ ✔

TakeOutIntermediateConv2 610073

✔

TakeOutProcessing2Conv2 610074

✔

TakeOutOutConv2 610054

✔ ✔

SIPLACE GEM SW Version GEM 505.01 HOST Interface Manual

3.7 Equipment Terminal Services

The SIPLACE supports exchange of free text messages with the Host (SECS Stream

10). This Equipment accepts the following messages from the Host, and responds

accordingly if the W-Bit is set to 1:

S10F3 /* Single Line Data */

S10F5 /* Multi-Line Data */

S10F9 /* Broadcast */

The message text will be displayed on the Equipment's CRT. Collection Event S10Ack

(CEID 1000002) occurs once the operator has acknowledged the message and an Event

Report will be sent to the Host (if enabled).

The S10F3 and S10F9 are restricted to a single TEXT data item, but S10F5 can contain

multiple TEXT data items. Each TEXT data item is limited to 160 characters. Each data

item in S10F5 will be displayed on a separate line at the equipment.

If the Operator has not acknowledged an existing message when the Host sends another

message, the new message will be displayed and the old one discarded.

The Host can send a message with a 0-length text to clear the Operator text display.

Also, the Equipment allows the operator to send a single block message to the Host via

S10F1. The maximum length of this text is 160 characters. The S10F2 response from

the Host is ignored.

3.7.1 Related Variables

There are no relevant variable for the Equipment Terminal Capability.

3.7.2 Related Collection Events

There is one CEID related to the Equipment Terminal Capability. For a more complete

listing of these collection events, please see "Appendix B -- Collection Events".

Collection Event CEID

HostMsgAckr 1000002

SIPLACE GEM SW Version GEM 505.01

HOST Interface Manual

3.8 Error Messages

The SIPLACE provides standard Stream 9 messages to report SECS-II errors. See 4.9

"SECS Message Detail" for detailed description of these messages:

S9F1 Unrecognized Device ID

S9F3 Unrecognized Stream

S9F5 Unrecognized Function

S9F7 Invalid Data

S9F9 Transaction Timeout

S9F11 Data Too Long

3.8.1 Related Variables

There are no Variables relevant for Error Messages.

3.8.2 Related Collection Events

There are no CEID related to Error Messages.